Operating instructions

Configuring the operating system
6.8 Changing HMI device settings
MP 377, MP 377 PRO (WinCC flexible)
118 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
6.8.4 Changing monitor settings
Requirements
You have opened the "OP Properties", dialog "Display" tab with the "OP" icon.
Procedure
Proceed as follows:
1. If you want to increase the brightness, press the "UP" button.
2. If you want to decrease the brightness, press the "DOWN" button.
3. Confirm your entries.
The dialog closes.
Result
The screen settings have been changed.