Operating instructions

Configuring the operating system
6.8 Changing HMI device settings
MP 377, MP 377 PRO (WinCC flexible)
116 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
Requirements
You have opened the "Regional and Language Settings" dialog with
the "Regional Settings"
icon.

① Region selection box
Procedure
Proceed as follows:
1. Select the region from the selection box.
2. Change to the "Number", "Currency", "Time" and "Date" tabs and set the selection boxes
to the desired settings.
3. Confirm your entries.
The dialog closes.
Result
The HMI device's regional settings have been changed.
6.8.3 Backup registry information
Registry information and temporary data
You can install and uninstall your own programs on the HMI devices under Windows CE.
You must save the registry settings after installation or uninstallation.
You can save the following data to the flash memory:
● Registry Information
● Temporary files
Restoring the file system of a memory card
If memory cards are used, the file system on the memory card may become damaged,
perhaps due to a power failure. The HMI device detects the defective file system on start-up
or when the memory card is inserted. The HMI device can restore the file system
automatically or on request.