Operating instructions

Configuring the operating system
6.5 Changing settings for operation
MP 377, MP 377 PRO (WinCC flexible)
108 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
Procedure
Proceed as follows:
1. If you want to enable character repetition, activate the "Enable character repeat"
check box.
2. If you want to change the delay, press a button or the slider in the "Repeat delay" group.
Moving the slider to the right will shorten the delay. Moving to the left will extend
the delay.
3. If you want to change the repeat rate, press a button or the slider in the
"Repeat rate" group.
Moving the slider to the right will shorten the repeat rate. Moving to the left will extend the
repeat rate.
4. Check the settings.
Procedure using the touch screen:
– Touch the test field.
The screen keyboard opens.
– Move the screen keyboard as needed.
Procedure using the keys:
– Select the test field.
5. Press an alphanumeric key and keep the key pressed down.
Check the implementation of the character repetition and the rate of the character
repetition in the test field.
6. If the settings are not perfect, correct them.
7. Confirm your entries.
The dialog closes.
Result
The character repetition and delay are set.
6.5.3 Setting the double-click
Introduction
You can start applications in the Control Panel and in Windows CE with a double-click.
A double-click corresponds to two brief touches in sequence.
In the "Mouse Properties" dialog, make the following adjustments for touch screen operation
and operation with external mouse:
● Interval between touch contacts on the touch screen
● Interval between mouse clicks