Operating instructions

Configuring the operating system
6.4 Control Panel
MP 377, MP 377 PRO (WinCC flexible)
Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
103
8. Make the necessary changes.
To do this, highlight the corresponding input object using the
TAB
key.
– Use the system keys of the HMI device to enter the new values in the text boxes.
– To operate a button, select the button with the cursor keys and then press
ENTER
.
– Open the drop down list boxes with the key combination
ALT
+ .
Select the required entry from the drop down list box using the cursor keys.
Confirm the selected entry by pressing
ENTER
.
– Press
}{
to activate or deactivate a check box.
– Select a radio button from a group using the cursor keys.
9. Confirm your entries with
ENTER
or discard your entries with
ESC
.
If you have selected an input object, you first have to complete entry.
The dialog closes.
10. Close the Control Panel.
Press the
ALT
key to do this.
The control panel menu is opened.
11. Select the "Close" entry using the cursor keys.
12. Press
ENTER
.
The Loader appears.