Operating instructions

Configuring the operating system
6.4 Control Panel
MP 377, MP 377 PRO (WinCC flexible)
102 Operating Instructions, 10/2008, 6AV6691-1DR01-0AB0
Changing the display of the screen keyboard
Key Functions
Switching between the numerical and alphanumerical keyboard
Switching between the normal level and Shift level of the alphanumerical
screen keyboard
Switchover to special characters
Switching from full display to reduced display
Switching from reduced display to full display
Close the screen keyboard
6.4.4.3 Operation with the keyboard
Introduction
The Control Panel is operated with the system keys of the HMI device.
Requirements
An active project has been terminated. The Loader appears.
Procedure
Proceed as follows to change settings in the Control Panel:
1. Open the Control Panel.
2. Select the "Control Panel" button in the loader using the cursor keys.
3. Press
ENTER
.
The Control Panel is opened.
4. Select the symbol of the required dialog with the cursor keys.
5. Press
ENTER
to open the dialog.
6. Change the tab as required.
Press
TAB
until the name of the tab is selected. Now switch between the tabs using
the cursor keys.
7. Use the
TAB
key to return to the input area.