Operating instructions
Table Of Contents
- SIMATIC IPC627C
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 Description
- 4 Application planning
- 5 Mounting
- 6 Connecting
- 7 Commissioning
- 8 Integration
- 9 Functions
- 10 Expansion and parameter assignment
- 11 Service and maintenance
- 11.1 Removing and installing hardware components
- 11.1.1 Repairs
- 11.1.2 Preventive maintenance
- 11.1.3 Replacing the Backup Battery
- 11.1.4 Removing/Installing the Power Supply
- 11.1.5 Installing / removing the bus board
- 11.1.6 Installing / removing the motherboard
- 11.1.7 Installing / removing the equipment fan
- 11.1.8 Installing / removing the power supply fan
- 11.1.9 Processor replacement
- 11.2 Reinstalling the software
- 11.2.1 General installation procedure
- 11.2.2 Restoring the Factory State of the Software Using the Restore DVD
- 11.2.3 Installing Windows
- 11.2.4 Setting up the language selection by means of the Multilanguage User Interface (MUI)
- 11.2.5 Recovery of Windows 7
- 11.2.6 Installing drivers and software
- 11.2.7 Installing the RAID Controller software
- 11.2.8 Installing the optional burner or DVD software
- 11.2.9 Update installation
- 11.2.10 Data backup / subsequent modification of partitions
- 11.2.11 CP 1616 onboard
- 11.3 Installing the RAID Controller software
- 11.4 BIOS update
- 11.5 BIOS Recovery
- 11.1 Removing and installing hardware components
- 12 Alarm, error, and system messages
- 13 Troubleshooting/FAQs
- 14 Technical data
- 15 Dimension drawings
- 16 Detailed descriptions
- A Appendix
- B ESD guidelines
- C List of abbreviations
- Glossary
- Index

Service and maintenance
11.2 Reinstalling the software
SIMATIC IPC627C
98 Operating Instructions, 11/2010, A5E02669068-02
11.2.6 Installing drivers and software
NOTICE
Before you install new drivers or updates for multilingual operating systems, (MUI versions),
reset the regional settings for menus and dialogs and the default language to US English.
Install the drivers and software from the included "Documentation and Drivers" CD.
Procedure:
1. Place the CD into the drive.
2. Run
START
.
3. Select
Drivers & Updates
from the index.
4. Select the operating system in
Drivers & Updates
.
5. Install the required driver.
NOTICE
If you require the driver for the chipset after reinstalling 7 / XP / Server 2008, this must
always be installed first before all other drivers.
11.2.7 Installing the RAID Controller software
The procedure for installing the software is described in the user manual on the supplied
"Documentation and Drivers" DVD in the directory Drivers\RAID-AHCI\Intel.
Note on Windows XP Professional / Windows Server 2008 / Windows 7
Unknown additional controllers must be made known to the Windows operating system.
1. Press F6 key within the startup sequence and follow the on-screen instructions. During
the rest of the installation, you will be asked several times for the missing driver of the
module. The driver is available on the included "Documentation and Drivers" DVD in the
Drivers\RAID-AHCI\Intel directory.
2. Copy the relevant driver to a USB stick.
3. After being prompted to press the F6 key, select the driver on the screen in a selection
window. To display the proposed list completely, you may need to scroll down with the
arrow keys.
– Selection at AHCI: "Intel(R) 5 Series 6 Port SATA AHCI Controller"
– Selection with RAID: "Intel(R) ICH8M-E/ICH9M-E/5 Series SATA RAID Controller"