Operating instructions

SIMATIC IPC627C
Operating Instructions, 11/2010, A5E02669068-02
9
Introduction
1
1.1 Preface
Purpose of this document
These operating instructions contain all the information you need for commissioning and
operation of the SIMATIC IPC627C.
It is intended both for programming and testing personnel who commission the device and
connect it with other units (automation systems, additional programming devices), as well as
for service and maintenance personnel who install add-ons or carry out fault/error analyses.
Basic knowledge required
A solid background in personal computers and Microsoft operating systems is required to
understand this manual. General knowledge in the field of automation control engineering is
recommended.
Scope of validity of this document
The documentation is valid for all supplied variations of the SIMATIC IPC627C and describe
the delivery status as of May 2010.
Its place in the information landscape
The documentation for the SIMATIC IPC627C includes the following sections:
● SIMATIC IPC627C, Getting Started
● SIMATIC IPC627C, Operating Instructions
The documentation is supplied in German,English, French, Spanish, Italian, Japanese and
Chinese with the device in electronic form as a PDF file on the "Documentation and Drivers"
DVD.
For further instructions on how to handle the software, please refer to the corresponding
manuals.
Conventions
The term "Box PC" or "device" is sometimes used to refer to the SIMATIC IPC627C product
in this documentation. The abbreviation "CP" stands for CP 1616 onboard.
History
Currently released versions of these operating instructions: