Operating instructions

Expansion and parameter assignment
10.3 Installing PCI/PCIe cards
SIMATIC IPC627C
68 Operating Instructions, 11/2010, A5E02669068-02
Display of the current memory configuration
A new memory module is automatically detected. When switching on the device and starting
the BIOS Setup using <F2>, the current memory size is displayed under "Total Memory".
10.3 Installing PCI/PCIe cards
10.3.1 Notes on the modules
The device is designed for use with modules conforming to PCI specifications V 2.2. 5 V 32-
bit PCI modules, universal (5 V & 3.3 V) 32-bit PCI modules and PCI Express x16 modules
can be operated. The permitted module dimensions are specified in the section Dimension
dra
wing
s (Page 123).
10.3.2 Installing / removing expansion modules
Preparation
Disconnect the device from the mains.
Installing expansion modules
How to install an expansion module (PCI / PCI express card):
1 Open the device (Page 65).
2
Loosen the fastening screw
④ and
remove the module bracket
⑤.
3
Remove the slot cover
① from the
intended slot.
4
Insert expansion module ② into
the slot provided.
Observe the guide rail
⑥ with long
PCI modules.
5 Mount the module bracket and
insert the slider ③.
6
Fasten the slot cover ① of the
expansion module.
7 Close the device.

  