Operating instructions
Table Of Contents
- SIMATIC IPC627C
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 Description
- 4 Application planning
- 5 Mounting
- 6 Connecting
- 7 Commissioning
- 8 Integration
- 9 Functions
- 10 Expansion and parameter assignment
- 11 Service and maintenance
- 11.1 Removing and installing hardware components
- 11.1.1 Repairs
- 11.1.2 Preventive maintenance
- 11.1.3 Replacing the Backup Battery
- 11.1.4 Removing/Installing the Power Supply
- 11.1.5 Installing / removing the bus board
- 11.1.6 Installing / removing the motherboard
- 11.1.7 Installing / removing the equipment fan
- 11.1.8 Installing / removing the power supply fan
- 11.1.9 Processor replacement
- 11.2 Reinstalling the software
- 11.2.1 General installation procedure
- 11.2.2 Restoring the Factory State of the Software Using the Restore DVD
- 11.2.3 Installing Windows
- 11.2.4 Setting up the language selection by means of the Multilanguage User Interface (MUI)
- 11.2.5 Recovery of Windows 7
- 11.2.6 Installing drivers and software
- 11.2.7 Installing the RAID Controller software
- 11.2.8 Installing the optional burner or DVD software
- 11.2.9 Update installation
- 11.2.10 Data backup / subsequent modification of partitions
- 11.2.11 CP 1616 onboard
- 11.3 Installing the RAID Controller software
- 11.4 BIOS update
- 11.5 BIOS Recovery
- 11.1 Removing and installing hardware components
- 12 Alarm, error, and system messages
- 13 Troubleshooting/FAQs
- 14 Technical data
- 15 Dimension drawings
- 16 Detailed descriptions
- A Appendix
- B ESD guidelines
- C List of abbreviations
- Glossary
- Index
Description
3.7 Design
SIMATIC IPC627C
Operating Instructions, 11/2010, A5E02669068-02
23
3.7.3 Connection elements
Interfaces
Arrangement of the interfaces on the front of the device
Item Description Description
①
DVI/VGA DVI/VGA connection for CRT or LCD monitor
with DVI interface, VGA via DVI/VGA adapter
②
Compact Flash card Slot for Compact Flash card
③
COM Serial V.24 port
④
USB 2.0 4 ports for USB devices
(only 2 ports can be simultaneously used as
high current)
⑤
ETHERNET 2x RJ 45 Ethernet connection for 10/100/1000
Mbps
⑥
PROFIBUS/MPI MPI interface (RS485, electrically isolated),
optional 9-pin D-sub socket (optional product
model)
⑦
PROFINET CP 1616 onboard interface, three RJ45 sockets
(optional product models)