Operating instructions

ManualsBrandsSiemens ManualsComputer equipmentSIMATIC IPC627C

201

202

203

204

205

206

207

208

209

210

Table Of Contents

SIMATIC IPC627C
Legal information
Table of contents
1 Introduction
- 1.1 Preface
- 1.2 Guideline to the operating instructions
2 Safety notes
- 2.1 General safety instructions
3 Description
- 3.1 Overview
- 3.2 Areas of application
- 3.3 Benefits
- 3.4 Function
- 3.5 Features
- 3.6 Windows Embedded Standard 2009
- 3.7 Design
4 Application planning
- 4.1 Transport
- 4.2 Unpacking and checking the delivery unit
- 4.3 Device identification data
- 4.4 Ambient and environmental conditions
- 4.5 Permitted mounting positions
5 Mounting
- 5.1 Installing the device
- 5.2 Installing the device with mounting brackets
- 5.3 Installing the device with the vertical mounting kit
- 5.4 Installing the device with the vertical mounting kit for PC port access from the front
6 Connecting
- 6.1 Connecting peripherals
- 6.2 Connecting the 100 - 240 V AC Power Supply
- 6.3 Connecting the (24 V) DC power supply
- 6.4 Connecting equipotential bonding
- 6.5 Connecting Ethernet/USB strain relief
- 6.6 Connecting the PROFINET strain relief
7 Commissioning
- 7.1 Requirements for commissioning
- 7.2 Basic commissioning - initial startup
- 7.3 Windows XP, Windows 7 Security Center
- 7.4 Switching off the device
- 7.5 Notes on operation
8 Integration
- 8.1 Integration into an automation system
- 8.2 PROFINET
9 Functions
- 9.1 Introduction
- 9.2 Temperature monitoring
- 9.3 Watchdog (WD)
- 9.4 Fan monitoring
- 9.5 Status display
- 9.6 SRAM buffer memory
- 9.7 Battery monitoring
- 9.8 AMT (Active Management Technology)
10 Expansion and parameter assignment
- 10.1 Opening the Device
- 10.2 Memory expansion
  - 10.2.1 Removing/Installing Memory Module
- 10.3 Installing PCI/PCIe cards
  - 10.3.1 Notes on the modules
  - 10.3.2 Installing / removing expansion modules
- 10.4 Installing drives
- 10.5 Installing/removing an on-board Compact Flash card
- 10.6 Installing/removing an additional Compact Flash card
11 Service and maintenance
- 11.1 Removing and installing hardware components
- 11.2 Reinstalling the software
- 11.3 Installing the RAID Controller software
- 11.4 BIOS update
- 11.5 BIOS Recovery
12 Alarm, error, and system messages
- 12.1 Boot error messages
- 12.2 BIOS beep codes
13 Troubleshooting/FAQs
- 13.1 General problems
- 13.2 Problems when Using Modules of Third-party Manufacturers
- 13.3 Display a temperature error by means of the DiagBase application
14 Technical data
- 14.1 General Specifications
- 14.2 Current/power requirements of the device
- 14.3 AC voltage supply
- 14.4 DC power supply
15 Dimension drawings
- 15.1 Overview of the dimensional drawings
- 15.2 Dimensional drawings of the device
- 15.3 Dimensional drawings for the installation of expansion modules
16 Detailed descriptions
- 16.1 Motherboard
- 16.2 Bus board
- 16.3 System resources
  - 16.3.1 Currently allocated system resources
  - 16.3.2 System resources used by the BIOS/DOS
- 16.4 BIOS-Setup
- 16.5 AMT (Active Management Technology)
- 16.6 Communications processor CP 1616 onboard
A Appendix
- A.1 Guidelines and declarations
- A.2 Certificates and approvals
- A.3 Service and support
B ESD guidelines
C List of abbreviations
- C.1 Abbreviations
Glossary
Index
- "
- 2
- A
- B
- C
- D
- E
- F
- G
- H
- I
- L
- M
- O
- P
- R
- S
- T
- U
- V
- W

Index

SIMATIC IPC627C

208 Operating Instructions, 11/2010, A5E02669068-02

Device configuration, 173

Device driver CP16xx.sys, 57

Device fan, 89, 90

Device fan su

pply, 139

DiagBase

software, 59

DiagMonitor

Extensi

on, 17

Tempe

ratu

re monitoring, 60

DiagMonitor softwa

re, 59

Diagnostics

BIOS beep code

s, 103

DiagBa

software, 59

DiagMonitor softwa

re, 59

Troubles

hooting, 111

Dimensio

nal drawings

Device, 124

Expan

sion

modules, 128

Dimensio

ns, 115

Directives

ESD direc

tives, 189

Dis

drives, 117

Display

Ports

, 141

Display interf

aces, 24

Drive ba

y module, 70

Removing

, 71

DVD burner, 47, 117, 130

DVD burner d

rive

Removing, 72

VD-ROM

Installing b

urner or DVD software, 99

DVI/VGA port, 23

Electrostatic sensitive devices, 12, 189

EMC, 186

EMC directive, 185

Equipotential bondi

ng termi

nal, 42

Error messa

ges

BIOS beep codes, 103

Booting, 103

ESD direc

tive

s, 189

Ethernet, 118

ETHERNET interface, 23

Ethernet RJ4

5 port, 16

Ethernet str

n relief, 42

Expansion

Memory, 66

Expan

sion

modules

Mounting, 68

pansi

on slots, 15, 117

Extension, 17

Fan

Removal, 89, 90

Firewall, 46

First commi

ssioning, 45

Flash dri

Booting, 54

Front ports

, 143

Front view, 19

Graphic controller, 117

Graphics, 130

Hard disk drive, 117

Removing, 73

Hard disk drives, 16

Partitions, 47, 48

I/O addresses

Assignment, 148

Assignme

nt, 148

I/O front ports, 143

Identification

data, 29

IEC power co

nnector, 25

Image

cre

ating, 100

Installation

Burner / DVD s

oftware, 9999

Installing

Windows, 93

Interfaces, 23, 117

COM, 23, 118

Ethernet, 118

ETHERNET, 23

Operator p

anels,

PROFIBUS, 55, 117

PROFIBUS/

MPI, 16, 23,

55, 130

RJ45 Ethernet, 16

USB, 16, 23, 117, 131

VGA, 16, 23

Interfaces a

ssignment on the mothe

rboard

COM2 (X31), 138