Operating instructions
Table Of Contents
- SIMATIC IPC627C
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 Description
- 4 Application planning
- 5 Mounting
- 6 Connecting
- 7 Commissioning
- 8 Integration
- 9 Functions
- 10 Expansion and parameter assignment
- 11 Service and maintenance
- 11.1 Removing and installing hardware components
- 11.1.1 Repairs
- 11.1.2 Preventive maintenance
- 11.1.3 Replacing the Backup Battery
- 11.1.4 Removing/Installing the Power Supply
- 11.1.5 Installing / removing the bus board
- 11.1.6 Installing / removing the motherboard
- 11.1.7 Installing / removing the equipment fan
- 11.1.8 Installing / removing the power supply fan
- 11.1.9 Processor replacement
- 11.2 Reinstalling the software
- 11.2.1 General installation procedure
- 11.2.2 Restoring the Factory State of the Software Using the Restore DVD
- 11.2.3 Installing Windows
- 11.2.4 Setting up the language selection by means of the Multilanguage User Interface (MUI)
- 11.2.5 Recovery of Windows 7
- 11.2.6 Installing drivers and software
- 11.2.7 Installing the RAID Controller software
- 11.2.8 Installing the optional burner or DVD software
- 11.2.9 Update installation
- 11.2.10 Data backup / subsequent modification of partitions
- 11.2.11 CP 1616 onboard
- 11.3 Installing the RAID Controller software
- 11.4 BIOS update
- 11.5 BIOS Recovery
- 11.1 Removing and installing hardware components
- 12 Alarm, error, and system messages
- 13 Troubleshooting/FAQs
- 14 Technical data
- 15 Dimension drawings
- 16 Detailed descriptions
- A Appendix
- B ESD guidelines
- C List of abbreviations
- Glossary
- Index
Description
3.7 Design
SIMATIC IPC627C
Operating Instructions, 11/2010, A5E02669068-02
19
Function Compact Flash card version
Media Player Available, V11.0
Windows Media Player Tour Not available
DirectX V9.0c
Accessories Available
Help files for all components Not available
Games Not available
Fonts 118
Windows XP Tour Not available
Microsoft Silverlight Available V 1.0
NetMeeting Available V 3.1
Note
Activation of "HORM" and creation of a "Hiber File"
When "HORM" is activated, the "Hibernate" function can be used for Windows Embedded
Standard 2009:
EWFMGR C: /activatehorm
"Hibernate" is activated following a restart. The system then always boots from this file.
3.7 Design
3.7.1 Exterior design
Front view
①
DVI/VGA port
②
On/off button
③
2 slots for expansion modules
④
Cover for Compact Flash Card
slot
⑤
COM interface
⑥
4 USB ports
⑦
2 RJ 45 Ethernet connections
⑧
IEC connector for AC power
supply or connection for DC
power supply
⑨
On / Off switch
⑩
PROFIBUS or PROFINET ports
⑪
Power supply fan