Operating instructions
Table Of Contents
- SIMATIC IPC627C
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 Description
- 4 Application planning
- 5 Mounting
- 6 Connecting
- 7 Commissioning
- 8 Integration
- 9 Functions
- 10 Expansion and parameter assignment
- 11 Service and maintenance
- 11.1 Removing and installing hardware components
- 11.1.1 Repairs
- 11.1.2 Preventive maintenance
- 11.1.3 Replacing the Backup Battery
- 11.1.4 Removing/Installing the Power Supply
- 11.1.5 Installing / removing the bus board
- 11.1.6 Installing / removing the motherboard
- 11.1.7 Installing / removing the equipment fan
- 11.1.8 Installing / removing the power supply fan
- 11.1.9 Processor replacement
- 11.2 Reinstalling the software
- 11.2.1 General installation procedure
- 11.2.2 Restoring the Factory State of the Software Using the Restore DVD
- 11.2.3 Installing Windows
- 11.2.4 Setting up the language selection by means of the Multilanguage User Interface (MUI)
- 11.2.5 Recovery of Windows 7
- 11.2.6 Installing drivers and software
- 11.2.7 Installing the RAID Controller software
- 11.2.8 Installing the optional burner or DVD software
- 11.2.9 Update installation
- 11.2.10 Data backup / subsequent modification of partitions
- 11.2.11 CP 1616 onboard
- 11.3 Installing the RAID Controller software
- 11.4 BIOS update
- 11.5 BIOS Recovery
- 11.1 Removing and installing hardware components
- 12 Alarm, error, and system messages
- 13 Troubleshooting/FAQs
- 14 Technical data
- 15 Dimension drawings
- 16 Detailed descriptions
- A Appendix
- B ESD guidelines
- C List of abbreviations
- Glossary
- Index
Detailed descriptions
16.4 BIOS-Setup
SIMATIC IPC627C
Operating Instructions, 11/2010, A5E02669068-02
171
16.4.11 Exit menu
You always exit BIOS Setup in this menu.
Figure 16-24 The "Exit" menu (example)
Entry Meaning
Exit Saving Changes All the parameter changes are saved. Afterwards a system restart is
carried out with the new parameters.
Exit Discarding Changes All the parameter changes are discarded and the system is restarted
with the old parameters.
Load Setup Defaults All parameters are set to safe values.
Discard Changes All the parameter changes are rejected.
Save Changes All the parameter changes are saved.
Load User Profile All the user-defined settings are loaded.
(The user settings must have been saved beforehand with the
Save User Profile function.)
Save User Profile The set parameters are saved as a USER profile.
Load Manufacturer Profile The manufacturer parameters are downloaded to the SETUP device.
Profiles Display field: Displays the active profile (Standard, User, Manufacturer)
with which the device is currently operating ...