Operating instructions
Table Of Contents
- SIMATIC IPC627C
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 Description
- 4 Application planning
- 5 Mounting
- 6 Connecting
- 7 Commissioning
- 8 Integration
- 9 Functions
- 10 Expansion and parameter assignment
- 11 Service and maintenance
- 11.1 Removing and installing hardware components
- 11.1.1 Repairs
- 11.1.2 Preventive maintenance
- 11.1.3 Replacing the Backup Battery
- 11.1.4 Removing/Installing the Power Supply
- 11.1.5 Installing / removing the bus board
- 11.1.6 Installing / removing the motherboard
- 11.1.7 Installing / removing the equipment fan
- 11.1.8 Installing / removing the power supply fan
- 11.1.9 Processor replacement
- 11.2 Reinstalling the software
- 11.2.1 General installation procedure
- 11.2.2 Restoring the Factory State of the Software Using the Restore DVD
- 11.2.3 Installing Windows
- 11.2.4 Setting up the language selection by means of the Multilanguage User Interface (MUI)
- 11.2.5 Recovery of Windows 7
- 11.2.6 Installing drivers and software
- 11.2.7 Installing the RAID Controller software
- 11.2.8 Installing the optional burner or DVD software
- 11.2.9 Update installation
- 11.2.10 Data backup / subsequent modification of partitions
- 11.2.11 CP 1616 onboard
- 11.3 Installing the RAID Controller software
- 11.4 BIOS update
- 11.5 BIOS Recovery
- 11.1 Removing and installing hardware components
- 12 Alarm, error, and system messages
- 13 Troubleshooting/FAQs
- 14 Technical data
- 15 Dimension drawings
- 16 Detailed descriptions
- A Appendix
- B ESD guidelines
- C List of abbreviations
- Glossary
- Index
Detailed descriptions
16.4 BIOS-Setup
SIMATIC IPC627C
162 Operating Instructions, 11/2010, A5E02669068-02
16.4.6 Advanced menu: Active Management Technology Support
Settings in the BIOS
The following figure shows the BIOS submenu "Advanced Menu > Active Management
Technology Support", in which you configure part of AMT in the BIOS. You will find further
configuration options for AMT in the MEBx (see "Settings in the MEBx").
Figure 16-13 Submenu "Advanced menu > Active Management Technology Support"
Entry Meaning
Intel AMT Support Enable and disable BIOS support for Intel Active Management
Technology (AMT)
Intel AMT Setup Prompt Enable and disable the boot interruption <Ctrl+P> to call up the MEBx
configuration page.
Intel AMT Password Write Enable and disable the AMT password write protection.
AMT CIRA Request Trig Enable CIRA (Client Initiated Remote Access, "Fast Call For Help").
CIRA allows AMT maintenance event if the AMT PC is not in the Intranet.
AMT CIRA Timeout CIRA timeout for connection establishment with MPS (Manageability
Presence Server / "vPro Enabled Gateway").
Unconfigure ME Resets all the values of the MEBx to their defaults (see section
"Resetting with Unconfigure (Page 178)").
USB Configure Enable and disable the USB configuration (provisioning).
Settings in the MEBx