Operating instructions
Table Of Contents
- SIMATIC IPC627C
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 Description
- 4 Application planning
- 5 Mounting
- 6 Connecting
- 7 Commissioning
- 8 Integration
- 9 Functions
- 10 Expansion and parameter assignment
- 11 Service and maintenance
- 11.1 Removing and installing hardware components
- 11.1.1 Repairs
- 11.1.2 Preventive maintenance
- 11.1.3 Replacing the Backup Battery
- 11.1.4 Removing/Installing the Power Supply
- 11.1.5 Installing / removing the bus board
- 11.1.6 Installing / removing the motherboard
- 11.1.7 Installing / removing the equipment fan
- 11.1.8 Installing / removing the power supply fan
- 11.1.9 Processor replacement
- 11.2 Reinstalling the software
- 11.2.1 General installation procedure
- 11.2.2 Restoring the Factory State of the Software Using the Restore DVD
- 11.2.3 Installing Windows
- 11.2.4 Setting up the language selection by means of the Multilanguage User Interface (MUI)
- 11.2.5 Recovery of Windows 7
- 11.2.6 Installing drivers and software
- 11.2.7 Installing the RAID Controller software
- 11.2.8 Installing the optional burner or DVD software
- 11.2.9 Update installation
- 11.2.10 Data backup / subsequent modification of partitions
- 11.2.11 CP 1616 onboard
- 11.3 Installing the RAID Controller software
- 11.4 BIOS update
- 11.5 BIOS Recovery
- 11.1 Removing and installing hardware components
- 12 Alarm, error, and system messages
- 13 Troubleshooting/FAQs
- 14 Technical data
- 15 Dimension drawings
- 16 Detailed descriptions
- A Appendix
- B ESD guidelines
- C List of abbreviations
- Glossary
- Index

Detailed descriptions
16.3 System resources
SIMATIC IPC627C
150 Operating Instructions, 11/2010, A5E02669068-02
16.3.2.2 Interrupt Assignments
The functions are assigned different interrupts, depending on the operating system. A
distinction is made between the PIC and APIC modes.
6\VWHP7LPHU+3(7 ,6$H[FOXVLYH
,6$H[FOXVLYH
,6$H[FOXVLYH
FDQDOVREHXVHGIRU&20
FDQDOVREHXVHGIRU&20
RQO\IUHHLQ$&3,3,&PRGH
)UHH
)L[HG
,6$H[FOXVLYH
)L[HG
FDQEHVZLWFKHGRIIIL[HGLQ(QKDQFHG0RGH
FDQEHVZLWFKHGRIIIL[HGLQ(QKDQFHG0RGH
&DQEHVZLWFKHGRII
&DQQRWEHGLVDEOHG
&DQQRWEHGLVDEOHG
&DQQRWEHGLVDEOHG
&DQQRWEHGLVDEOHG
&DQEHVZLWFKHGRII
&DQEHVZLWFKHGRII
&DQEHVZLWFKHGRII
&DQEHVZLWFKHGRIIH[FOXVLYH
;
;
36.H\ERDUG&RQWUROOHU(PXODWLRQ
;
&DVFDGHG,QWHUUXSW&RQWUROOHU
;
&RP3RUW&20
;
&RP3RUW&20
;
)'&RQWUROOHU
3DUDOOHOSRUW
;
5HDOWLPHFORFN57&
;
360DXV&RQWUROOHU(PXODWLRQ
;
1XPHULFSURFHVVRU
;
+'&RQWUROOHUSULPDU\
;
+'&RQWUROOHUVHFRQGDU\
=<
6$7$
=<
86%SRUW
=<
86%SRUW
=<
86%SRUW
=<
86%&RQWUROOHU
=<
(WKHUQHW
=<
(WKHUQHW
=<
9*$
=<
352),%86RGHU352),1(7
)
(
+
*
%
$
'
&
&RPPHQW,541XPEHU
,54$3,&0RGH
,543,&0RGH
+RVW3&,,54/LQH
)XQFWLRQ
1)
Host PCI-IRQ A to H will be assigned IRQ 16 to 23 permanently in ACPI mode. Host PCI-IRQ A to H will be
automatically assigned IRQ 0 to 15 in PIC mode. A specific assignment can not be enforced.
X
Interrupt in PIC and APIC mode
Y
Interrupt in APIC mode
Z
BIOS Default Interrupt in PIC mode (e.g. DOS)
Figure 16-3 Interrupt assignment in PIC mode