Operating instructions
Table Of Contents
- SIMATIC IPC627C
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 Description
- 4 Application planning
- 5 Mounting
- 6 Connecting
- 7 Commissioning
- 8 Integration
- 9 Functions
- 10 Expansion and parameter assignment
- 11 Service and maintenance
- 11.1 Removing and installing hardware components
- 11.1.1 Repairs
- 11.1.2 Preventive maintenance
- 11.1.3 Replacing the Backup Battery
- 11.1.4 Removing/Installing the Power Supply
- 11.1.5 Installing / removing the bus board
- 11.1.6 Installing / removing the motherboard
- 11.1.7 Installing / removing the equipment fan
- 11.1.8 Installing / removing the power supply fan
- 11.1.9 Processor replacement
- 11.2 Reinstalling the software
- 11.2.1 General installation procedure
- 11.2.2 Restoring the Factory State of the Software Using the Restore DVD
- 11.2.3 Installing Windows
- 11.2.4 Setting up the language selection by means of the Multilanguage User Interface (MUI)
- 11.2.5 Recovery of Windows 7
- 11.2.6 Installing drivers and software
- 11.2.7 Installing the RAID Controller software
- 11.2.8 Installing the optional burner or DVD software
- 11.2.9 Update installation
- 11.2.10 Data backup / subsequent modification of partitions
- 11.2.11 CP 1616 onboard
- 11.3 Installing the RAID Controller software
- 11.4 BIOS update
- 11.5 BIOS Recovery
- 11.1 Removing and installing hardware components
- 12 Alarm, error, and system messages
- 13 Troubleshooting/FAQs
- 14 Technical data
- 15 Dimension drawings
- 16 Detailed descriptions
- A Appendix
- B ESD guidelines
- C List of abbreviations
- Glossary
- Index

Alarm, error, and system messages
12.2 BIOS beep codes
SIMATIC IPC627C
Operating Instructions, 11/2010, A5E02669068-02
107
Display
(hex)
Meaning Description Remedy
10H BDS_ENTER_BDS Enter BDS entry Phase Boot Device
Selection
Service case
11H BDS_INSTALL_HOTKEY Install Hotkey
service
Installation of the
Hotkey service
Service case
12H BDS_ASF_INIT ASF Initial Initialize Alert
Standard Format
Service case
13H BDS_PCI_ENUMERATION_START PCI
enumeration
Enumerate PCI bus Service case
14H BDS_BEFORE_PCIIO_INSTALL PCI resource
assign complete
Assign PCI resources Run a test by
disabling the
hardware
components in
SETUP, or by
removing the
expansion modules
installed on the bus
module
15H BDS_PCI_ENUMERATION_END PCI
enumeration
complete
PCI enumeration
completed
Service case
16H BDS_CONNECT_CONSOLE_IN Keyboard
Controller,
Keyboard and
Mouse initial
Initialization of
keyboard and mouse
Run a test by
replacing the
keyboard/mouse
17H BDS_CONNECT_CONSOLE_OUT Video device
initial
Initialize graphic
connection
Service case
18H BDS_CONNECT_STD_ERR Error report
device initial
Initialize default error
output
Service case
19H BDS_CONNECT_USB_HC USB host
controller initial
Initialize USB host
controller
Service case
1AH BDS_CONNECT_USB_BUS USB BUS driver
initial
Initialize USB bus
driver
Service case
1BH BDS_CONNECT_USB_DEVICE USB device
driver initial
Initialize USB device
driver
Service case
1CH BDS_NO_CONSOLE_ACTION Console device
initial fail
Initialization of the
console faulty
Service case
1DH BDS_DISPLAY_LOGO_SYSTEM_INFO Display logo or
system
information
Display logo or
system information
Service case
1EH BDS_START_IDE_CONTROLLER IDE controller
initial
Initialization of the
IDE controller
Service case
1FH BDS_START_SATA_CONTROLLER SATA controller
initial
Initialization of the
SATA controller
Service case
20H BDS_START_ISA_ACPI_CONTROLLER SIO controller
initial
Initialization of the
Super IO
Service case
21H BDS_START_ISA_BUS ISA BUS driver
initial
Initialization of the
ISA bus driver
Service case
22H BDS_START_ISA_FDD Floppy device
initial
Initialization of the
floppy connection
Service case