Operating instructions

ManualsBrandsSiemens ManualsComputer equipmentSIMATIC IPC627C

Table Of Contents

SIMATIC IPC627C
Legal information
Table of contents
1 Introduction
- 1.1 Preface
- 1.2 Guideline to the operating instructions
2 Safety notes
- 2.1 General safety instructions
3 Description
- 3.1 Overview
- 3.2 Areas of application
- 3.3 Benefits
- 3.4 Function
- 3.5 Features
- 3.6 Windows Embedded Standard 2009
- 3.7 Design
4 Application planning
- 4.1 Transport
- 4.2 Unpacking and checking the delivery unit
- 4.3 Device identification data
- 4.4 Ambient and environmental conditions
- 4.5 Permitted mounting positions
5 Mounting
- 5.1 Installing the device
- 5.2 Installing the device with mounting brackets
- 5.3 Installing the device with the vertical mounting kit
- 5.4 Installing the device with the vertical mounting kit for PC port access from the front
6 Connecting
- 6.1 Connecting peripherals
- 6.2 Connecting the 100 - 240 V AC Power Supply
- 6.3 Connecting the (24 V) DC power supply
- 6.4 Connecting equipotential bonding
- 6.5 Connecting Ethernet/USB strain relief
- 6.6 Connecting the PROFINET strain relief
7 Commissioning
- 7.1 Requirements for commissioning
- 7.2 Basic commissioning - initial startup
- 7.3 Windows XP, Windows 7 Security Center
- 7.4 Switching off the device
- 7.5 Notes on operation
8 Integration
- 8.1 Integration into an automation system
- 8.2 PROFINET
9 Functions
- 9.1 Introduction
- 9.2 Temperature monitoring
- 9.3 Watchdog (WD)
- 9.4 Fan monitoring
- 9.5 Status display
- 9.6 SRAM buffer memory
- 9.7 Battery monitoring
- 9.8 AMT (Active Management Technology)
10 Expansion and parameter assignment
- 10.1 Opening the Device
- 10.2 Memory expansion
  - 10.2.1 Removing/Installing Memory Module
- 10.3 Installing PCI/PCIe cards
  - 10.3.1 Notes on the modules
  - 10.3.2 Installing / removing expansion modules
- 10.4 Installing drives
- 10.5 Installing/removing an on-board Compact Flash card
- 10.6 Installing/removing an additional Compact Flash card
11 Service and maintenance
- 11.1 Removing and installing hardware components
- 11.2 Reinstalling the software
- 11.3 Installing the RAID Controller software
- 11.4 BIOS update
- 11.5 BIOS Recovery
12 Alarm, error, and system messages
- 12.1 Boot error messages
- 12.2 BIOS beep codes
13 Troubleshooting/FAQs
- 13.1 General problems
- 13.2 Problems when Using Modules of Third-party Manufacturers
- 13.3 Display a temperature error by means of the DiagBase application
14 Technical data
- 14.1 General Specifications
- 14.2 Current/power requirements of the device
- 14.3 AC voltage supply
- 14.4 DC power supply
15 Dimension drawings
- 15.1 Overview of the dimensional drawings
- 15.2 Dimensional drawings of the device
- 15.3 Dimensional drawings for the installation of expansion modules
16 Detailed descriptions
- 16.1 Motherboard
- 16.2 Bus board
- 16.3 System resources
  - 16.3.1 Currently allocated system resources
  - 16.3.2 System resources used by the BIOS/DOS
- 16.4 BIOS-Setup
- 16.5 AMT (Active Management Technology)
- 16.6 Communications processor CP 1616 onboard
A Appendix
- A.1 Guidelines and declarations
- A.2 Certificates and approvals
- A.3 Service and support
B ESD guidelines
C List of abbreviations
- C.1 Abbreviations
Glossary
Index
- "
- 2
- A
- B
- C
- D
- E
- F
- G
- H
- I
- L
- M
- O
- P
- R
- S
- T
- U
- V
- W

Introduction

1.2 Guideline to the operating instructions

SIMATIC IPC627C

10 Operating Instructions, 11/2010, A5E02669068-02

Edition Comment

05/2010 First Edition

11/2010 Second edition

Changes: Power supply, on/off switch and on/off button, BIOS setup, AMT,

programming interface DMAPI, system resources

New sections: "BIOS update", "BIOS recovery"

Deleted sections: "Turning on the device", "Reinstalling the operating system",

"Partitioning the data medium", "Installing drivers and software", "Installing

updates", "Data backup"

1.2 Guideline to the operating instructions

Organization of contents Contents

Contents Detailed organization of the documentation, including the index of pages and chapters

Introduction Purpose, layout and description of the important topics.

Safety information Covers all general safety-related aspects of statutory regulations in terms of the installation,

commissioning and operation of the product/system.

Description Fields of application, features and installation of the product/system

Application planning Aspects of storage, transport, environmental and EMC conditions to be considered in the

preparatory stage

Installing Product installation options and installation instructions

Connecting Options for connecting the product and wiring instructions

Commissioning Commissioning the product/system.

Integration Options of integrating the product into existing or planned system environments/networks.

Functions Monitoring and display functions

Expansions / Programming Installation of expansion devices (memory, modules, drives)

Maintenance and service Replacement of hardware components, restoring and setup of the operating system,

installation of drivers and software

Troubleshooting Problems, cause, remedy

Specifications General specifications in compliance with relevant standards and current/voltage values

Dimensional Drawings Dimensions of the device and of modules

Detailed descriptions Structure, function and features of vital components, distribution of system resources and

use of the BIOS Setup routine

Appendix Guidelines and certifications, service and support, notes on retrofitting

ESD directives General ESD directives.