Operating instructions

Commissioning
7.2 Commissioning - Windows Embedded Standard
SIMATIC IPC427C
46 Operating Instructions, 10/2010, A5E02414743-03
7.2.3 Language selection in Windows Embedded Standard 7
Changing languages is possible using the Restore CD/DVD (forms part of the scope of
delivery). The CD/DVD contains the required language packages and help for changing the
system language.
Note
Note the license terms of Windows Embedded Standard 7
Please note the license terms for Windows Embedded Standard 7 and especially the
extended SIEMENS AG Software terms for Windows Embedded Standard 7.
You can find the license terms in the delivered document "MICROSOFT SOFTWARE
LICENSE TERMS for Windows Embedded Standard 7(E)" and in the system drive under
\Windows\System32\license.rtf.
Change system language
To change the language for Windows Embedded Standard 7, follow these steps:
Prerequisite:
The "Legacy USB Support" option has to be set to "Enabled" in the Advanced menu of the
BIOS so that the device can address a USB CD-ROM drive.
1. Connect a USB CD-ROM drive to the device.
2. Insert the Restore CD/DVD in the drive, restart the device and when the BIOS message:
Press <F2> to enter Setup or <ESC> to show Boot menu
appears, press the F2 key.
3. Select the Boot menu and move the entry "CD-ROM Drive" to the first position.
4. End the BIOS setup with the "Exit Saving Changes" entry.