© Siemens AG 2007 Systems 2/2 2/9 2/10 2/11 2/13 2/14 2/15 Ch. 8 Ch. 9 FS101) FS101) Ch.
© Siemens AG 2007 Systems Introduction 2 ■ Overview Order No. Page 3RK1 2/14 3RK1 2/15 3SF2, 3SF3 Ch. 8 / Ch. 9 3SF7 See Catalog FS 10 "Sensor Technology" AS-Interface / ASIsafe ASIsafe enables the integration of safety-oriented components in an AS-Interface network, for example: • EMERGENCY-STOP pushbuttons • Protective door switches • Safety light arrays The simple wiring of AS-Interface, which is a major advantage, is maintained.
© Siemens AG 2007 Systems Introduction AS-Interface EMERGENCY-STOP pushbuttons Order No. Page 3SF5 Ch. 9 6GK7 2/17 6GK1 2/21 2 • Degree of protection IP65/IP67 • EMERGENCY-STOP directly on AS-Interface using integrated modules • Metal or plastic version Your advantage: Easy direct connection of service-proven operator controls to ASIsafe EMERGENCY-STOP front plate Masters The AS-Interface master creates the connection to higher-level control systems.
© Siemens AG 2007 Systems Introduction Order No. Page 3RK1, 3RK2 2/29, 2/34, 2/36 3RK1 2/40 3RG9, 3RK1 2/43 AS-Interface / Slaves 2 Slaves contain the AS-Interface electronics and connection options for sensors and actuators in the field and in the cabinet. A total of up to 62 slaves can be connected to one bus. The slaves then exchange their data in cyclic mode with a control module (master).
© Siemens AG 2007 Systems Introduction Modules with special functions / Counter modules Order No. Page 3RK1 2/49 3RK1 2/50 3RK1 2/50 3RK1 Ch. 6 3RK1 Ch. 6 3RK1 Ch. 6 3RK1 Ch.
© Siemens AG 2007 Systems Introduction Pushbuttons and indicator lights Order No. Page 3SB3 Ch. 9 8WD4 Ch.
© Siemens AG 2007 Systems Introduction Order No. Page 3RK1, 6GK1 Repeater/extender: See Catalog IK PI "Industrial Communication for Automation and Drives" AS-Interface / System components and accessories Repeater/extender and extension plug • Extension of an AS-i segment to max. 200 m with an extension plug (without an additional power supply unit) 2 Accessories comprise tools for mounting, installation and operation as well as individual components.
© Siemens AG 2007 Systems Introduction Order No.
© Siemens AG 2007 AS-Interface Introduction Transmission technology AS-Interface is an open, international standard according to EN 50295 and IEC 62026-2 for process and field communication. Leading manufacturers of actuators and sensors all over the world support the AS-Interface. Interested companies are provided with the electrical and mechanical specifications by the AS-Interface Association. AS-Interface is a single master system.
© Siemens AG 2007 AS-Interface Introduction Communication overview ■ Overview ■ More information 2 System components Numerous system components are offered for implementing the communication.
© Siemens AG 2007 AS-Interface Introduction AS-Interface specification 2 ■ Overview Speed/Flexibility • 4DI/4DO in A/B technology • 8DI/8DO in A/B technology • Additional analog profiles • Transmission of serial data • Safety monitor • Safe input slaves ASi Spec. V3.0 • • • ASIsafe 31 Slaves 5 ms bus cycle time ASi Spec. V2.1 NSA0_00453a • • 62 Slaves (10 ms) Analog profiles Diagnostics peripherals ASi Spec. V2.
© Siemens AG 2007 AS-Interface Introduction AS-Interface specification 2 AS-Interface master To be able to operate A/B slaves on an AS-Interface network you must also use master modules that meet the minimum requirements of Specification 2.1. A/B technology is supported by the masters of the SIMATIC S7 and the DP/AS-Interface links from Siemens. Only standard slaves and A slaves (= A/B slave with an A address) can be operated on masters which do not support Specification 2.1.
© Siemens AG 2007 AS-Interface ASIsafe Introduction NSA0_00005c Power supply unit Safety monitor AS-i POWER Standard PLC Standard-Master 2 ■ Overview StandardSlave Safe slave with EMERGENCY STOP Signal evaluation of slave/safety monitor Master information (through regular I/O transfer) Safety is included The ASIsafe concept supports the direct integration of safetyrelated components, such as emergency stop switches, protective door switches or safety light arrays, in the AS-Interface network.
© Siemens AG 2007 AS-Interface ASIsafe AS-Interface safety monitors ■ Overview 2 The monitor comes in two expansion levels: • Basic safety monitor with starter set of modules and basic functionality • Expanded safety monitor with expanded features and functionality Both expansion levels are available with one or two enabling circuits with two-channel configuration. The safety monitor is used in an AS-Interface bus system to monitor protective devices, e.g. EMERGENCY-STOP switches.
© Siemens AG 2007 AS-Interface ASIsafe AS-Interface safety modules ■ Overview The K60F compact safety module similarly has two standard outputs in addition to two safety inputs (see K45F for categories); power is supplied from either the yellow AS-Interface cable or as auxiliary voltage from the black 24 V DC cable.
© Siemens AG 2007 AS-Interface ASIsafe AS-Interface safety modules ■ Selection and ordering data DT Order No. Price per PU 2 Version PU PS* (UNIT, SET, M) PG Weight per PU approx. kg K20F compact safety modules I/O type Uaux 24 V 2 F-DI -- A 3RK1 205-0BQ30-0AA3 1 1 unit 121 0.075 } 3RK1 205-0BQ00-0AA3 1 1 unit 121 0.103 • For wall mounting } 3RK1 901-2EA00 1 1 unit 121 0.027 • For standard rail mounting } 3RK1 901-2DA00 1 1 unit 121 0.
© Siemens AG 2007 AS-Interface Masters CP 142-2 • Master connection for the ET 200X distributed peripherals system to AS-Interface using 12-pole connector • Easy operation in the input/output address range of the SIMATIC ET 200X • No configuration of the CP for AS-Interface required • Actuating up to 31 AS-Interface slaves according to AS-Interface Specification V2.
© Siemens AG 2007 AS-Interface Masters CP 243-2 2 ■ Overview The CP 243-2 is the AS-Interface master for the innovative SIMATIC S7-200 generation. This communications processor (6GK1 243-2AX01-0AX0) supports the extended AS-Interface Specification V2.1 and performs the following functions: • Connection of up to 62 AS-Interface slaves and integrated analog value transmission (according to the extended AS-Interface Specification V2.
© Siemens AG 2007 AS-Interface Masters CP 343-2 The CP 343-2 is the AS-Interface master for the SIMATIC S7-300 programmable controller and the ET 200M distributed I/O station. The communications processor performs the following functions: • Connection of up to 62 AS-Interface slaves and integrated analog value transmission (according to the extended AS-Interface Specification V2.1) • Supports all AS-Interface master functions according to the extended AS-Interface Specification V2.
© Siemens AG 2007 AS-Interface Masters CP 343-2 P 2 ■ Overview The CP 343-2 P is the AS-Interface master for the SIMATIC S7-300 programmable controller and the ET 200M distributed I/O station. The communications processor performs the following functions: • Supports the configuration of the AS-Interface network with STEP 7 V5.2 and higher • Connection of up to 62 AS-Interface slaves and integrated analog value transmission (according to the extended AS-Interface Specification V2.
© Siemens AG 2007 AS-Interface Routers IE/AS-i LINK PN IO • Compact router between Industrial Ethernet (PROFINET IO-Device) and AS-Interface • Single and double AS-Interface master (according to AS-Interface Specification V3.
© Siemens AG 2007 AS-Interface Routers IE/AS-i LINK PN IO S7-300 e.g. with CP 343-1 2 PC with SOFTNET PN IO S7-400 with CP 443-1 Advanced SCALANCE X208 PROFINET HMI IE/AS-i LINK PN IO ET 200S AS-Interface Power supply unit Power supply unit Slave Laser scanner Safety monitor Safe slave with Emergency Stop Integration of AS-Interface on PROFIBUS through IE/AS-i LINK PN IO as single/double master Using an upstream IWLAN client module, e.g.
© Siemens AG 2007 AS-Interface Routers Radio cell 1 2 IE/AS-i LINK PN IO Radio cell 2 S7-400 PROFINET Industrial Ethernet SCALANCE W788-1PRO SCALANCE W788-1PRO Field PG/ Notebook with CP 7515 Client Module SCALANCE W746-1PRO SIMATIC HMI IE/AS-i LINK PN IO G_IK10_XX_30143 ASInterface Automatic Guided Vehicle System (AGVS) Wireless communication between Industrial Ethernet and AS-Interface components ■ Selection and ordering data Version DT Order No.
© Siemens AG 2007 AS-Interface Routers DP/AS-i LINK Advanced ■ Overview 2 • Compact router between PROFIBUS (DP Slave) and AS-Interface • Single and double AS-Interface master (according to AS-Interface Specification V3.
© Siemens AG 2007 AS-Interface Routers DP/AS-i LINK Advanced 2 S7-400 with CP 443-5 Extended PC with SOFTNET-DP S7-300 e.g. with CP 342-5 HMI PROFIBUS ET 200S ET 200pro On use of DP/AS-i LINK Advanced as dual master PG e.g.
© Siemens AG 2007 AS-Interface Routers DP/AS-Interface Link 20E ■ Overview 2 DP/AS-Interface Link 20E connects PROFIBUS DP to AS-Interface. It performs the following functions: • PROFIBUS DP slave and AS-Interface master • Connection of up to 62 AS-Interface slaves and integrated analog value transmission (according to the extended AS-Interface Specification V2.1) • Supports all AS-Interface master functions according to the extended AS-Interface Specification V2.1, i.e.
© Siemens AG 2007 AS-Interface Routers DP/AS-Interface Link 20E The DP/AS-Interface Link 20E is a PROFIBUS DP slave (according to EN 50170) and an AS-Interface master (according to EN 50295). It enables the AS-Interface to be operated on PROFIBUS DP. Single PROFIBUS masters can exchange I/O data with AS-Interface in cyclic mode; masters with acyclic services can exchange I/O data and perform master calls. The DP/ASInterface Link 20E cannot be used together with the extender.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Introduction 2 ■ Overview K60 K20 Three coordinated series of AS-Interface compact modules with digital and analog compact modules and a high degree of protection are available for operation in the field: • Series K60 (digital and analog) • Series K45 (digital) • Series K20 (digital) All compact modules are characterized by particularly simple handling. The K60 and K45 modules are mounted with a mounting plate.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Digital I/O modules, IP67 - K60 The K60 digital AS-Interface compact modules are characterized by optimized handling characteristics and user-friendliness. They permit the assembly times and start-up times of AS-Interface to be reduced by up to 40 %. Please note that these modules can be used only with a new master according to AS-i Specification 3.0 (e.g.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Digital I/O modules, IP67 - K60 ■ Selection and ordering data DT Order No. Price per PU 2 Version PU PS* (UNIT, SET, M) PG Weight per PU approx.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Digital I/O modules, IP68 / IP69K - K60R ■ Overview 2 Connection 3RX8 000-0CD42-1AF0 (5.0 m) 3RX8 000-0CE42-1AF0 (5.0 m) NSA0_00339c K60R K60R K60R 3RX8 000-0GF42-1AA6 (0.5 m) 3RX8 000-0GF42-1AB0 (1.0 m) 3RX8 000-0GF42-1AB5 (1.
© Siemens AG 2007 AS-Interface Slaves 2 I/O modules for operation in the field Digital I/O modules, IP68 / IP69K - K60R Tests IP68/IP69K Please note the following conditions: • The configuration guidelines for AS-Interface apply. For all M12 connecting cables the maximum permissible current is limited to 4 A. The cross-section of these cables amounts to just 0.34 mm². For connection of the K60R modules, the aforementioned M12 connecting cables can be used for the spur lines.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Digital I/O modules, IP68 / IP69K - K60R DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. 2 Version kg AS-Interface M12 feeders 3RX9 801-0AA00 for flat cable for Cable length Cable end in feeder AS-i M12 socket -- available } 3RX9 801-0AA00 1 1 unit 121 0.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Digital I/O modules, IP67 - K45 2 ■ Overview Two mounting plates are offered for the K45 compact modules: • The mounting plate for wall mounting has a hole pattern that is identical to that of the K60 compact modules. This means that K60 compact modules can be mounted together with K45 modules in an aligned arrangement. The flat cables can be inserted in the recesses of the mounting plates where they cause no hindrance.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Digital I/O modules, IP67 - K45 DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. 2 Version kg Accessories K45 mounting plates • For wall mounting } 3RK1 901–2EA00 1 1 unit 121 0.027 • For standard rail mounting } 3RK1 901–2DA00 1 1 unit 121 0.036 3RK1 901–2EA00 AS-Interface sealing caps • For free M12 sockets } 3RK1 901–1KA00 100 10 units 121 0.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Digital I/O modules IP67 - K20 ■ Overview 2 In applications with tow chains, many users rely on placing the AS-Interface bus cable in a round cable. In this case, the K20 modules support direct connection to the round cable. No flat to round cable adapter is required.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Digital I/O modules IP67 - K20 Version DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg Digital I/O modules, IP67 – K20 3RK2 200-0CT30-0AA3 Type Current Slave carrying type capacity of outputs Pin assignment Connection method 4 inputs -- A/B Standard M8 A 3RK2 200-0CT30-0AA3 1 1 unit 121 0.075 -- A/B Y A 3RK2 200-0CQ30-0AA3 1 1 unit 121 0.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Digital I/O modules IP67 - K20 DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. 2 Version kg AS-Interface M12 feeders 3RX9 801-0AA00 for flat cable for Cable length Cable end in feeder AS-i M12 socket -- available } 3RX9 801-0AA00 1 1 unit 121 0.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Digital I/O modules, IP67 - user modules ■ Overview You can find more information on the Internet at: http://mall.ad.siemens.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Analog I/O modules, IP67 - K60 ■ Overview ■ Benefits 2 • Analog modules are just as easy to integrate in AS-Interface as digital modules • Analog values can be easily detected and issued locally • Preprocessing of the analog value transmission in the master enables rapid evaluation of the analog values • Up to four values can be detected using one analog module • Extremely fast transmission and conversion of analog values th
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Analog I/O modules, IP67 - K60 Version DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg Analog I/O modules IP67 - K60, analog profile 7.3 • Slave type: Standard • Modules supplied without mounting plate Inputs 3RK1 207-1BQ44-0AA3 Type 1 or 2 inputs Current (switch-selectable by means of a jumper Voltage plug at socket 3) Measuring range 4 ...
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the field Analog I/O modules, IP67 - K60 DT Order No. Price per PU PU PS* (UNIT, SET, M) PG 2 Version Weight per PU approx. kg Accessories Manual, German Only available to download on the Internet: http://www.siemens.com/automation/manuals K60 mounting plates • Wall mounting } 3RK1 901-0CA00 1 1 unit 121 0.065 • Standard rail mounting } 3RK1 901-0CB01 1 1 unit 121 0.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the control cabinet, IP20, Introduction 2 ■ Overview SlimLine S22.5/S45 Flat module For AS-Interface applications inside cabinets there are various module series for the most diverse requirements: • SlimLine S22.5 • SlimLine S45 • F90 module • Flat module All modules of these series can be snap-mounted directly on a standard mounting rail or be fastened using screws.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the control cabinet, IP20, SlimLine ■ Overview 2 SlimLine modules of the S22.5 and S45 series The AS-Interface series of modules for the "SlimLine" cabinet with degree of protection IP20 creates space in the control cabinet and in distributed local boxes. For these modules the priority was placed on a narrow type of construction. They have a width of only 22.5 or 45 mm.
© Siemens AG 2007 AS-Interface Slaves I/O modules for operation in the control cabinet, IP20, SlimLine Version DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg S22.5 SlimLine modules Inputs: PNP transistor Type Connection Slave type Inputs terminals Outputs 4 inputs Screw Standard 2-wire -- } 3RK1 200-0CE00-0AA2 1 1 unit 121 0.138 Screw Standard 2 and 3-wire -- } 3RK1 200-0CE02-0AA2 1 1 unit 121 0.
© Siemens AG 2007 AS-Interface Slaves I/O Modules for operation in the control cabinet, IP20, F90 modules ■ Selection and ordering data DT Order No. Price per PU 2 Version PU PS* (UNIT, SET, M) PG Weight per PU approx. kg Modules F90 Standard slave Type Connection Inputs Outputs 4 inputs/ 4 outputs Screw 2- and 3-wire PNP transistor PNP transistor 1A A 3RG9 002-0DB00 1 1 unit 121 0.112 2- and 3-wire PNP transistor PNP transistor 2A A 3RG9 002-0DA00 1 1 unit 121 0.
© Siemens AG 2007 AS-Interface Slaves Special integrated solutions AS-Interface communications modules 3RK1 400-0CD00-0AA3 AS-Interface communications module for printed circuit board installation 3RG9 005-0SA00 AS-Interface communications module for printed circuit board installation + U N C N C + IN 1 O U 0 IN 2 O U 0 IN 3 O U 0 IN 4 O U 0 + + IN 1 O U 0 IN 2 O U 0 IN 3 O U 0 IN 4 O U 0 T 1 T 2 T 3 T 4 + P R O G A S I A S I+ H ilf T 1 T 2 T 3 T 4 A S IA S I+ N S A 0 _ 0 0 0 7 8 a N S
© Siemens AG 2007 AS-Interface Slaves Special integrated solutions AS-Interface communications modules 2 3RK1 400-1CD00-0AA2 AS-Interface communications module for printed circuit board installation If the inputs are loaded with more than 200 mA, the module does not respond to invoking by a master.
© Siemens AG 2007 AS-Interface Slaves Modules with special functions Counter modules If the time criterion stipulated in the graphic is violated, the count value is rejected. This module is used to send hexadecimally coded count values (LSB=D0, MSB=D3) to a higher level controller. The count value is increased by one for each valid count pulse at terminal 8. Beginning at 0, the module counts up to 15 and then begins again at 0.
© Siemens AG 2007 AS-Interface Slaves Modules with special functions Ground-fault detection modules 2 ■ Overview The following ground faults are detected: • Ground fault from AS-i "+" • Ground fault from AS-i "-" • Ground fault from sensors and actuators which are supplied from the AS-Interface voltage. "... Ground faults in control circuits must not result in a machine's unintentional starting or hazardous movements, nor must they prevent it from stopping (EN 60204, Part 1 or DIN VDE 0113).
© Siemens AG 2007 AS-Interface Slaves Modules with special functions Overvoltage protection modules ASInterface OVP 2 Configuration guidelines ASInterface Application NSA0_00093a Device without ground terminal → Grounding of the mounting plate Application Device with ground terminal Mounting plate OVP = Overvoltage protection Configuration guidelines for overvoltage protection modules The grounding of protection modules and the units to be protected must be effected through a shared groundin
© Siemens AG 2007 AS-Interface Slaves AS-Interface connections for LOGO! 2 ■ Overview Every LOGO! can now be connected to the AS-Interface system Using the AS-Interface connection for LOGO!, an intelligent slave can be integrated in the AS-Interface system. With the modular interface it becomes possible to integrate the different basic units in the system according to their functionality. Similarly, functionalities can be quickly and easily adapted to new requirements by exchanging the basic unit.
© Siemens AG 2007 AS-Interface Power Supply Units AS-Interface power supplies, IP20 ■ Benefits AS-Interface power supplies are an essential and functionally important part of an AS-Interface network. They supply the electronics of the network (AS-Interface modules and AS-Interface masters) and the connected sensor technology.
© Siemens AG 2007 AS-Interface Power Supply Units AS-Interface power supplies, IP20 ■ More information 2 Conversion table Previous type New type Order No. Version Number Order No. Version 3RX9 307-0AA00 Single output IP20 2.4 A 1 3RX9 501-0BA00 Single output IP20 with ground fault detection 3A 3RX9 310-0AA00 Single output IP20 with ground fault detection 2.
© Siemens AG 2007 AS-Interface Transmission Media AS-Interface shaped cables The stations are connected using the AS-Interface cable. This two-wire cable has a trapezoidal shape, thus ruling out polarity reversal. Connection is effected by the insulation piercing method. In other words, male contacts pierce the shaped AS-Interface cable and make reliable contact with the two wires. Cutting to length and stripping are superfluous. Consequently, AS-Interface stations (e.g.
© Siemens AG 2007 AS-Interface System Components and Accessories Extension plug ■ Overview 2 With the extension plug / extension plug plus it is possible to double the cable length possible in an AS-Interface segment from 100 to 200 m. The extension plug / extension plug plus is a passive component which is connected to that point of the AS-Interface network that is furthest away from the power supply.
© Siemens AG 2007 AS-Interface System Components and Accessories Addressing units To be able to participate in data exchange with the master, all stations have to be addressed before the AS-Interface network is configured. This can be done • offline by means of an addressing unit or • online using the master of the AS-Interface system. The addresses themselves are the values 1 to 31 (or 1A to 31A and 1B to 31B for the extended AS-Interface Specification 2.1).
© Siemens AG 2007 AS-Interface System Components and Accessories AS-Interface analyzers ■ Overview ■ Benefits 2 • Simple and user-friendly operation enables diagnostics of AS-Interface networks without help from specialists • Speedy troubleshooting thanks to intuitive display in statistics mode • Test logs provide verification of the state and quality of the installation for service and approval • Recorded logs facilitate remote diagnostics by Technical Assistance • Comprehensive trigger functions ena
© Siemens AG 2007 AS-Interface System Components and Accessories AS-Interface analyzers Test log NSA0_00362 2 Data mode The recorded data of the online statistics are easy to output and document using a test log. Verification of the state of the plant can thus be provided for approvals or service assignments. The new measurement assistant records the bus signals for an adjustable period, automating the creation of the test log. A standardized quality test of AS-i plants is thus possible.
© Siemens AG 2007 AS-Interface System Components and Accessories AS-Interface analyzers ■ Selection and ordering data DT Order No. Price per PU AS-Interface analyzers } 3RK1 904-3AB01 1 1 unit 121 0.450 } 3RX9 801-0AA00 1 1 unit 121 0.029 A 3RX8 000-0CD42-1AF0 1 1 unit 574 0.176 2 Version PU PS* (UNIT, SET, M) PG Weight per PU approx.
© Siemens AG 2007 AS-Interface System Components and Accessories Miscellaneous accessories Version DT Order No. Price per PU PU PS* (UNIT, SET, M) PG Weight per PU approx. kg AS-Interface standard distributors, for AS-Interface flat cables • Current carrying capacity up to 7 A } 3RK1 901-1NN00 1 1 unit 121 0.086 A 3RK1 901-1NN10 1 1 unit 121 0.040 3RX9 801-0AA00 1 1 unit 121 0.
© Siemens AG 2007 AS-Interface System Components and Accessories Miscellaneous accessories DT Order No. Price per PU PU PS* (UNIT, SET, M) PG AS-Interface sealing caps M12 for free M12 sockets } 3RK1 901-1KA00 100 10 units 121 0.100 AS-Interface sealing caps M12, tamper-proof for free M12 sockets A 3RK1 901-1KA01 100 10 units 121 0.100 AS-Interface sealing caps M8 for free M8 sockets A 3RK1 901-1PN00 100 10 units 121 0.
© Siemens AG 2007 ECOFAST System System overview 2 ■ Overview MES SIVACON S7 HMI NSA0_00410c Industrial Ethernet Power bus 400 V PROFIBUS/PROFINET PB Safety ET 200pro SINAMICS ET 200S FU SIRIUS motor starter applications is a system solution for the flexible and uniform decentralization of drive technology in the field.
© Siemens AG 2007 ECOFAST System System overview 2 ■ Application SIMATIC ET 200S: The flexible and modular system with degree of protection IP20 The SIMATIC ET 200S system for PROFIBUS DP and PROFINET offers a range of I/O modules (digital and analog), motor starters (mechanical and solid-state) and frequency converters. The SIMATIC ET 200S is suitable for central use in cabinets as well as for distributed use in local control cabinets.
© Siemens AG 2007 ECOFAST System System overview Product For further information see SIMATIC ET 200S • A&D Mall: Section Automation Systems / SIMATIC Industrial Automation Systems / Distributed Peripherals / ET 200S • Catalog IK PI, Chapter "SIMATIC ET 200 Distributed Peripherals" • Catalog LV 1, Chapter "Load Feeders, Motor Starters and Soft Starters" SIMATIC ET 200pro • A&D Mall, Section Automation Systems / SIMATIC Industrial Automation Systems / Distributed Peripherals / ET 200pro • Catalog IK PI
© Siemens AG 2007 SIRIUS Safety Integrated System overview 2 ■ Overview In spite of the steadily increasing complexity in industrial automation, many applications are restricted to specific areas. However simple the requirements may be, it is important to have a reliable partner for these cases too. performing safety tasks in your plant. SIRIUS Safety Integrated combined with standard fieldbus systems such as AS-Interface and PROFIBUS can solve even networked safety tasks of greater complexity.
© Siemens AG 2007 SIRIUS Safety Integrated System overview Standardization • Uniform user interface for standard and safety technology • Libraries increase re-usability • Fewer control cabinet variants on machines • Simpler installation technology in plants thanks to bus systems Integration of safety technology in standard automation means less work for you and greater cost effectiveness.
© Siemens AG 2007 SIRIUS Safety Integrated System overview 2 Safe instructing and reporting When things become critical, you must be able to intervene quickly and easily in order to bring machines and plants to a safe standstill. For such moments we offer a complete range of reliable commanding and signaling devices. For example, EMERGENCY-STOP control devices for the most diverse applications. Two-hand operation consoles for maximum safety on presses or EMERGENCY-STOP punches.
© Siemens AG 2007 SIRIUS Safety Integrated System overview The new failsafe motor starters of the SIMATIC ET 200S provide failsafe stopping and shut-down for safety-oriented applications which are realized at control level. They can be used as island solutions directly in the field, for example, or for selective disconnection in PROFIsafe applications. The safe load feeder unites the functions of a motor starter and a safety relay and is respon- sible for safe shutting down.
© Siemens AG 2007 PROFIBUS System Overview Introduction • Bus system - For process and field communication in cell networks with few stations and with field devices - For data communication according to IEC 61158/EN 50170 • Provides openness for connecting standard-conform components from different manufacturers - PROFIBUS – the fieldbus standard in production and process automation comprises: - Defining of standards for physical bus characteristics and access control - Defining of the user protocol and
© Siemens AG 2007 PROFIBUS System Overview Process or field communication ■ Overview The process or field communication (PROFIBUS DP, PROFIBUS PA) is used to link field device to an automation, HMI or I&C system. The connection can be established through integrated interfaces on the CPU or using interface modules (IMs) and communications processors (CPs).
© Siemens AG 2007 PROFIBUS System Overview Process or field communication PROFIBUS DP/PA is selected when I/O stations on a machine or in a plant (e.g. the field level) are widely distributed and can be spatially grouped (>16 inputs/outputs) to form a station (e.g. ET 200). master/slave principle and send the input data to the controller or the PC. Powerful tools such as STEP 7 and COM PROFIBUS are available to configure and parameterize the I/O stations.
© Siemens AG 2007 PROFIBUS System Overview Process or field communication PROFIBUS DP differentiates between two different classes of master and various DP functionalities: • DP master class 1 The DP master class 1 is the central component of PROFIBUS DP. In a fixed, continuously recurring message cycle the central controller or PC exchanges information with distributed stations (DP slaves).
© Siemens AG 2007 PROFIBUS System Overview Data communication ■ Overview 2 Communication functions The data communication (e.g. PROFIBUS FMS) is used to exchange data between automation devices or between an automation device and intelligent partners (PC, computer, etc.).
© Siemens AG 2007 PROFIBUS System Overview Data communication System connections Automation system 2 For many terminal devices that are communication processors (CPs) which have implemented the communication functions in the firmware already and as the result relieve the terminal device of having to perform communication tasks (e.g. flow control, blocking, etc.).
© Siemens AG 2007 PROFIBUS System Overview Topologies Siemens offers an extensive range of PROFIBUS network components for electrical and optical transmission technology. PROFIBUS is standardized according to IEC 61158/EN 50170 for universal automation (PROFIBUS FMS and PROFIBUS DP) and to IEC 61158-2 for process automation (PROFIBUS PA). Electrical network • The electrical network uses a shielded, twisted two-wire cable. The RS 485 interface works with voltage differences.
© Siemens AG 2007 PROFIBUS System Overview Topologies Optical network Optical PROFIBUS with OLMs Optical PROFIBUS with integrated interface and OBT The optical PROFIBUS with integrated interface and OBT is configured as a line structure. A cost-optimized solution in the form of devices with an integrated optical interface is available for this purpose. Terminal equipment with an RS 485 interface can be connected through an optical bus terminal (OBT).
© Siemens AG 2007 PROFIBUS System Overview Topologies Mixed structures consisting of an electrical and an optical network are possible. The transition between the two media is effected by an OLM. In the way stations on the bus communicate with each other there is no difference between two-wire technology and fiber optic technology. Up to 127 stations can be connected to one PROFIBUS network.
© Siemens AG 2007 PROFIBUS System Overview Topologies With the help of the PROFIBUS infrared link module (ILM), one or more PROFIBUS slaves or slave segments can be coupled by wireless means. With a maximum transmission rate of 1.5 Mbit/s and a maximum range of 15 m, communication with moving parts, e.g. automatic guided vehicles (AGVs) or the replacement of wear-prone systems (sliprings or slipring leads) is possible. Master e.g.
© Siemens AG 2007 SIRIUS Modular System System overview ■ Overview 2 system, where you will find everything that you need for switching, protecting and starting motors and industrial systems. This modular selection of standard components covers the range up to 250 kW / 400 V in just seven sizes which are optimally coordinated, can be combined with ease and use the same accessories. Control technology can be that simple.
© Siemens AG 2007 SIRIUS Modular System System overview 2 The new SIRIUS 3RW40 soft starters – for soft starting up to high ratings Two new types of soft starter in compact SIRIUS design provide the answer for the starting of three-phase asynchronous motors with reduced strain on the load and the network. The new SIRIUS 3RW40 soft starter is used in demanding standard applications. The SIRIUS 3RW44 soft starter is the right choice for high functionality and for difficult starting operations.
© Siemens AG 2007 SIRIUS Modular System System overview ■ More information 2 Product For further information see Robust and reliable: SIRIUS 3RT contactors Thanks to the extreme robustness and best contact reliability of • A&D Mall: Section Low-Voltage Controls / SIRIUS Industrial our contactors, their switching is extremely precise and reliable.
