Specifications

AS-Interface
ASIsafe
3SF1 hinge switches
Metal enclosures
6/27
Siemens IK PI · 2009
6
■ Overview
The 3SF1 hinge switches with safety-oriented communication
can be directly connected using the AS-Interface bus system.
The safety functions no longer have to be conventionally wired
up.
With the 3SF1 position switches the ASIsafe electronics are
integrated in the switch enclosure.
The hinge switches are provided for mounting on hinges.
There are two actuator variants here:
• Hollow shaft, diameter inside 8 mm, outside 12 mm
• Solid shaft, diameter 10 mm
For the ASIsafe version of the hinge switch, the basic switch and
actuator head must be ordered separately. The basic switches
correspond to the position switches of the standard version (only
use versions with snap-action contacts).
The standards and approvals are the same as for the 3SF1
position switches (see page 6/15).
■ Selection and ordering data
Modular system
1 or 2 contacts · 3 LEDs · Degree of protection IP66/IP67 · M12 connector socket
qPositive opening according to IEC 60947-5-1, Appendix K.
Version Contacts LEDs Order No.
Basic switches · Enclosure width 40 mm according to EN 50041
ASIsafe basic switch
With M12 connector socket, 4-pole
Channel 1 on NC contact,
channel 2 on NC contact
Snap-action contacts 2 NC 24 V DC
q
3SF1 114-1LA00-1BA1
Basic switches · Enclosure width 56 mm
ASIsafe basic switch
With M12 connector socket, 4-pole
Channel 1 on NC contact,
channel 2 on M12 socket, right
Snap-action contacts 1 NC 24 V DC
q
3SF1 124-1LA00-1BA2
Actuator heads
Actuator head with
hollow shaft
Hollow shaft
• Operating angle 10° 3SE5 000-0AU21
Actuator head with
solid shaft
Solid shaft
• Operating angle 10° 3SE5 000-0AU22