Specifications

AS-Interface Slaves
AS-Interface connections for LOGO!
6/145
Siemens IK PI · 2009
6
■ Overview
Every LOGO! can now be connected to the
AS-Interface system
Using the AS-Interface connection for LOGO!, an intelligent
slave can be integrated in the AS-Interface system. With the
modular interface it becomes possible to integrate the different
basic units in the system according to their functionality.
Similarly, functionalities can be quickly and easily adapted to
new requirements by exchanging the basic unit.
The interface module provides four inputs and four outputs on
the system. These I/Os do not actually exist in hardware terms,
however, but are only virtually present through the interface on
the bus.
■ Technical specifications
■ Selection and ordering data
Supply voltage V DC 24
Inputs/outputs
4 / 4
(virtual inputs / outputs)
Bus connection
AS-Interface according
to specification
Ambient temperature °C
0 ... +55
Degree of protection
IP20
Mounting
Onto standard mounting rail
Dimensions (W x H x D) mm
36 x 90 x 58
Indications of the LEDs
LEDs Status
• Green
•OK
•Red
• No data traffic
• Flashes red/yellow
• Zero address
Version Order No.
3RK1 400-0CE10-0AA2
AS-Interface connections for LOGO!
• Four virtual inputs
• Four virtual outputs
3RK1 400-0CE10-0AA2