Specifications

AS-Interface Slaves
Motor starters for operation in the control cabinet
3RA6 compact feeders / Accessories for
3RA6 direct-on-line and reversing starters
6/117
Siemens IK PI · 2009
6
■ Selection and ordering data (continued)
1)
Not suitable for 3RV11 motor starter protectors with overload relay function.
Common clamping of S00 and S0 motor starter protectors is not possible,
due to the different modular spacings and terminal heights.
The 3RV19 15-5DB connecting piece is available for connecting the
compact feeders to circuit breakers size S00.
Type Order No.
Terminals for "Self-Protected Combination Motor Controllers (Type E)"
according to UL 508 for infeed through parallel wiring with compact feeders
3RV19 28-1H
Note: UL 508 demands 1-inch clearance and 2-inch creepage distance at line side
for "Combination Motor Controller Type E".
Terminal blocks are not required for use according to CSA.
With size S0, these terminal blocks cannot be used in combination with
3RV19 .5 three-phase busbars.
Terminal blocks type E
For extended clearance and creepage distances (1 and 2 inch)
3RV19 28-1H
Number of compact feeders
and circuit breakers
that can be connected
Modular
spacing
Rated current
I
n
at 690 V
For motor
starter protec-
tors Size
Order No.
without lateral accessories
mm A
3-phase busbars for infeed with 3RA6
3RV19 15-1AB
3RV19 15-1BB
3RV19 15-1CB
3RV19 15-1DB
For feeding several compact feeders and/or circuit breakers with screw terminals,
mounted side by side on standard mounting rails, insulated, with touch protection.
24563S0
1)
3RV19 15-1AB
34563S0
1)
3RV19 15-1BB
44563S0
1)
3RV19 15-1CB
54563S0
1)
3RV19 15-1DB