Specifications

AS-Interface Slaves
Motor starters for operation in the control cabinet
3RA6 compact feeders
3RA61 direct-on-line starters
6/113
Siemens IK PI · 2009
6
■ Selection and ordering data
1)
Selection depends on the concrete startup and rated data of the protected
motor.
2)
Delivery time is dependent on connection type, rated control supply
voltage and complement variant: temporarily C or X, later A or B.
3RA61 20-1CB32 3RA61 20-2EB32
Direct start
A set of 3RA69 40-0A adapters is
required for screw fixing.
Standard induction motor
4-pole at 400 V AC
1)
Setting range
for solid-state overload release
Compact feeder
Order No.
According to IEC/EN 60947-6-2 no welding of contactor contacts at I
q
= 53 kA at 400 V
Standard output P
kW A
0.09 0.1 ... 0.4 3RA61 20- 7 A 7 3 7
0.37 0.32 ... 1.25 3RA61 20- 7 B 7 3 7
1.5 1 ... 4 3RA61 20- 7C 7 3 7
5.5 3 ... 12 3RA61 20- 7 D 7 3 7
15 8 ... 32 3RA61 20- 7 E 7 3 7
Order No. supplement for connection type
• Without terminals for use with the infeed system for 3RA6 and the AS-i add-on module 0 0
• With screw terminals 1
• With spring-loaded terminals 2
Order No. supplement for rated control supply voltage
• 24 V AC/DC (for combining with AS-i add-on module) B
• 42 ... 70 V AC/DC E
• 110 ... 240 V AC/DC P
Order No. supplement for complement variant
• For standard mounting rail or screw mounting:
Basic version including 1 pair of main circuit terminals and 1 pair of control circuit terminals
2
• For use with the infeed system for 3RA6
without main circuit terminals (with control circuit terminals)
3
• For standard mounting rail or screw mounting when using
the AS-i add-on module without control circuit terminals (with main circuit terminals)
4
NSB0_01946