Specifications

AS-Interface Slaves
I/O Modules for Operation in the Control Cabinet, IP20
Introduction
6/101
Siemens IK PI · 2009
6
■ Overview
SlimLine S22.5/S45
F90 module
Flat module
For AS-Interface applications inside control cabinets there are
various module series for the most diverse requirements:
• SlimLine S22.5
• SlimLine S45
• F90 module
• Flat module
All modules of these series can be snap-mounted directly on
a standard mounting rail or be fastened using screws.
AS-Interface modules in IP20 have direct terminals for the
AS-Interface cables and therefore do not require a base.
1)
More information about these modules:
see "Modules with Special Functions"
Series Spectrum Mounting on 35 mm
standard mounting rail
according to EN 50022
Wall mounting using
push-in lugs
(Order No.: 3RP1 903)
Other possibilities
SlimLine S22.5
• 4I (standard and A/B modules)
•4O
• 2I/2O (steady-state/relay outputs)
• Counters
1)
• Ground-fault detection module
1)
✓ ✓ --
SlimLine S45 • 4I/4O (steady-state/relay outputs)
• 4I/4O with floating I/Os
• 4I/3O (A/B modules)
• 4I/4O (A/B modules Spec. 3.0)
✓ ✓ --
F90 module • 4I/4O (screw terminal connection)
• 4I/4O (connection using Combicon
connector)
• 16I
✓ -- --
Flat module • 4I/4O (screw terminal connection)
-- --
Integrated lugs for
screw fixing