Technical data

13
Getting Started Box PC 620
A5E00131477-03
4 Front Ports
The front ports are located behind the cover below the floppy disk drive. They are used for connection
of the following front elements:
• I/O port for the connection of front components
• LVDS display port
5 Reset Button
The reset button can be actuated with a pointed object (e.g. an opened up paper clip). If you actuate,
the button, a hardware reset is triggered. The PC restarts. Data loss is possible with a hardware reset.
Bottom View
1
1 Equipotential Grounding
The connection with the equipotential grounding on the system housing to the central earth terminal of
the cabinet or the unit into which the computer is fitted, ensures that faults arising from external power
supply cables, signalling cables or cables to peripheral units are diverted.
Side View
2
3
1
1 Mounting possibilities for the WinAC Backup Battery
You can mount the SIMATIC WinAC CPU41x-2PCI backup battery here. Use the battery holder
without a slot plate supplied with the WinAC module to do this.
2 Input Data of Power Supply Unit
To distinguish between both performances of the power supply unit, the power supply unit with a
105W performance been marked with P
max=
105W.