Technical data

Configuring the SIMATIC Box PC 620
6-3
SIMATIC Box PC 620 Manual
C79000-G7076-C639-02
Screen Display Following Power On
With the default setting of your PC, the display shown below appears following
power-on:
Phoenix BIOS 4.0 A5E00016562–ES04
Copyright 1985-98 Phoenix Technologies Ltd.
All Rights Reserved.
SIMATIC Box PC 620 V07.01.04
CPU = PentiumII 266MHz
640K System RAM Passed
63MB Extended RAM Passed
0128K Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowed
UMB upper limit segment address: xxxx
Mouse initialized
Fixed Disk 0: xxxx
ATAPI CD-ROM: Txxx
Press <F2> to enter SETUP
If you press the F2 key while the above display is shown, you select the
ROM-based BIOS setup program. In this program, you can set a number of
system functions and hardware configurations of your programming device.
The default settings are effective on delivery. You can change these settings using
the BIOS setup. The modified settings become effective when you have
saved them and terminated the BIOS setup.
The following screen shots may differ from what is shown here, depending on the
device configuration. The following screen form appears when you start the BIOS
setup:
PhoenixBIOS Setup Utility
Item Specific Help
System Time:
ESC Exit
Tab
System Date:
[ 15:35:32 ]
Select Item
Select Menu
+ / –
Enter Select
Change Values
Sub-Menu
F9
F10
Setup Defaults
Save and Exit
Shift-Tab Enter, or
selects field.
Diskette A:
[ 1.44 MB, 31/2” ]
Primary Master
[4326 MB]
Primary Slave
[None]
Memory Cache:
Boot Options
Keyboard Features
[Write Back]
Hardware Options
System Memory:
Extended Memory:
Main Security Power Exit
Menu bar
Operation line
Help window
Selectable
submenu
Advanced
Secondary Master
[None]
Secondary Slave
[None]
[ 01/23/1999 ]
640 KB
64512 KB
Header
Example:
Hour/Minute/Second
Month/Day/Year
Boot Sequence Version
F1 Help
Figure 6-1 SETUP Main Menu