Technical data

Setting Up and Operating the SIMATIC Box PC 620
4-9
SIMATIC Box PC 620 Manual
C79000-G7076-C639-02
Connecting USB Periphery
You can connect peripheral devices with USB interfaces to the USB port.
 Plug the USB cable into the port.
The device is automatically detected by a Plug and Play operating system, e.g.
Windows 98, and is then available.
A USB keyboard can be used to manipulate the BIOS setup.
USB port
Figure 4-6 USB connection
Note
Operating systems which do not support Plug and Play (e.g. Windows NT 4.0), do
not generally allow the operation of USB devices.