Technical data

Configuring the SIMATIC Box PC 620
6-13
SIMATIC Box PC 620 Manual
C79000-G7076-C639-02
”Hardware Options” Field
The following submenu appears when you select the “Hardware Options” field in
the main menu:
PhoenixBIOS Setup-Utility
Item Specific Help
ESC Exit
Select Item
Select Menu
+ / –
Enter Select
Change Values F9
F10
Setup Defaults
Save and Exit
Sub-Menu
PCI - MPI / DP:
Main
Hardware Options
[Enabled]
Enable or disable the
PCI - Multi Point
Interface (MPI / DP)
Trackball / PS/2 Mouse:: [Auto]
CRT / LCD selection: [SIMULTAN]
CRT 640 X 480: [75 Hz]
CRT 800 X 600: [75 Hz]
CRT 1024 X 768: [75 Hz]
LCD-Screensize: [Graph& Text Expand]
Cardbus/PCMCIA Slot:
[Enabled]
F1 Help
Ethernet Adress: [080006247000]
SafeCard functions: [Enabled]
Legacy USB Suport: [Disabled]
On Board Ethernet [Enabled]
DSTN Contrast:
[154]
Figure 6-8 ”Hardware Options” Submenu
The parameters of the interfaces present on the basic module are set here.
Entry Meaning
PCI-MPI/DP Enables the CP5611-compatible MPI/DP interface. The recourses are
managed by the BIOS PCI plug and play mechanism.
On Board
Ethernet
[Enabled] The ethernet port on the motherboard is enabled.
[Disabled] The ethernet port on the motherboard is disabled.
Ethernet
Address
The individual ethernet address is entered here.
Cardbus /
PCMCIA Slot
[Disabled] Disables the Cardbus / PCMCIA interfaces.
[Enabled] The resources are managed by the BIOS
PCI plug and play mechanism.
SafeCard
functions
[Enabled] On board monitoring functions are enabled.
[Disabled] No monitoring functions.
The relevant driver and the application must be started for operation of
the monitoring functions.
Legacy USB
Suport
[Disabled] A USB-capable operating system is required to
operate a USB keyboard or a USB mouse.
Setup adjustments can be made with a USB keyboard.
[Enabled] USB keyboard and USB mouse are supported by the
BIOS. Non-USB capable operating systems can be
used.