Operating instructions
Table Of Contents
- SICLOCK® TC 100 Plant Central Clock
- Overview
- Safety notices
- Preface
- Table of Contents
- 1 Safety instructions
- 2 Description
- 3 Hardware description
- 4 Operation planning
- 5 Mounting
- 6 Connection
- 7 Configuration Tool
- 8 Parameter assignment and operation of the device
- 9 Parameter assignment
- 10 Parameter table
- 11 Service and maintenance
- 12 Messages
- 13 Technical data
- 14 Dimension drawing
- 15 Circuit diagrams
- 16 Spare parts / accessories
- A Annex
- B ESD guidelines
- C List of icons
- D Glossary
- Index
Configuration Tool
7-5
© Siemens AG 2010 All Rights Reserved
SICLOCK
®
TC100 Operating Instructions
7.3.4 Reading / writing parameters, setting to factory defaults
In online mode, you can read or write an individual parameter, or reset it to the
factory setting.
How to activate the functions "Read parameter", "Write parameter" and
"Reset parameter to factory settings":
1. Ensure that the Configuration Tool is connected to the device.
See Connect / disconnect online connection (Chapter 7.2.1).
2. Select the desired parameter / entry from the Parameter tree or Parameter
table.
3. Right-click the parameter or entry.
−> The context menu opens.
Select the desired function with a left mouse click.
Figure 7-7 Context menu for reading, writing and resetting parameters