Operating instructions
Table Of Contents
- SICLOCK® TC 100 Plant Central Clock
- Overview
- Safety notices
- Preface
- Table of Contents
- 1 Safety instructions
- 2 Description
- 3 Hardware description
- 4 Operation planning
- 5 Mounting
- 6 Connection
- 7 Configuration Tool
- 8 Parameter assignment and operation of the device
- 9 Parameter assignment
- 10 Parameter table
- 11 Service and maintenance
- 12 Messages
- 13 Technical data
- 14 Dimension drawing
- 15 Circuit diagrams
- 16 Spare parts / accessories
- A Annex
- B ESD guidelines
- C List of icons
- D Glossary
- Index
ESD guidelines
B-1
© Siemens AG 2010 All Rights Reserved
SICLOCK
®
TC100 Operating Instructions
B.3 Fundamental measures to protect against static
discharge
Make sure the grounding is good
Make sure all persons, workplaces and packaging are sufficiently grounded when
ESD components are being handled. In this manner you avoid static discharge.
Avoid direct contact
You should only touch ESD components if this is unavoidable (for example,
during maintenance work). Hold the modules so that you touch neither pins nor
printed conductors. In this manner, the discharge energy cannot reach or damage
sensitive devices.
If you have to carry out measurements on a module, discharge yourself before
carrying out any actions. Do so by touching grounded metallic parts. Only use
grounded measuring instruments.