User Manual

Function
The operating and display philosophy of SICLIMAT TP177 is based on a
hierarchical structure:
• Opening screen (all plant)
• Plant diagram (all devices in a system)
• Equipment diagram (all groups within an item of equipment)
• Data point graphics
− Plant
− Characteristic
− Messages
− Measured value
− Controller
− Switch command
− Setpoint
− Output signal / positioning command
− Numerical value
• Time programs
− Daily schedules
− Weekday programs
− 7-day programs
− Special date programs
− “One-off” programs
System data
The configuration menu offers the following options:
• Entry or modification of the MPI/PROFIBUS DP or Ethernet addresses
• Password administration and user administration
• Language selection
The system setting covers the following options:
• Contrast settings
• Touch calibration
• System settings
• Other settings
Post-engineering
The standard functions of SICLIMAT TP177 are available without engineering. In
principle, these can be expanded (e.g. parameter setting, color, font size, and
user-definable masks and graphics). The WINCC Flexible engineering tool from
Siemens A&D is required for this purpose.
Actions required before connecting SICLIMAT TP177:
• Engineer the automation level (SIMATIC S7) using the Engineering Manager (EM)
for SICLIMAT X from Version 4.0.
• Download data relevant to the process into the SIMATIC S7-300 or S7400
• Connect the SICLIMAT TP177 via MPI or PROFIBUS DP or PROFINET
to all S7 CPUs to be operated and displayed.
• Enter system data (e.g. CPU addresses, password etc.).
3/6
Siemens Building Technologies SICLIMAT TP177 local operator terminal CK1N9899en
Building Automation 24.10.2006