User Manual

PROFIBUS DP/P-bus link Siemens Building Technologies
3-8 User's guide Building Automation
Diagram for graphics-based engineering
DIAGNOSTIC
I/Os
Inputs Outputs
Start addresses of modules ADDR. S 1-8 Common fault status, modules 1-8
S 9-16 Common fault status, modules 9-16
S17-24 Common fault status, modules 17-24
S25-32 Common fault status, modules 25-32
S33-40 Common fault status, modules 33-40
S41-48 Common fault status, modules 41-48
S49-56 Common fault status, modules 49-56
S57-60 Common fault status, modules 57-60
ST-SAM Common fault status, module
List of input and output parameters
Name I/O Can
be
linked
to
Assignment Value range Prior use Related
parameter
Test mode
1 By selection
2 By parameter
setting
Min Max 1 2
B-ADR
I - 0 32767 0 - No No
B-ADR
I - 0 32767 0 - No No
S 1-8
O Byte Byte connection
M-A-P
- - Byte connection
M-A-P
- Yes No
S 9-16
O Byte Byte connection
M-A-P
- - Byte connection
M-A-P
- Yes No
S17-24
O Byte Byte connection
M-A-P
- - Byte connection
M-A-P
- Yes No
S25-32
O Byte Byte connection
M-A-P
- - Byte connection
M-A-P
- Yes No
S33-40
O Byte Byte connection
M-A-P
- - Byte connection
M-A-P
- Yes No
S41-48
O Byte Byte connection
M-A-P
- - Byte connection
M-A-P
- Yes No
S49-56
O Byte Byte connection
M-A-P
- - Byte connection
M-A-P
- Yes No
S57-60
O Byte Byte connection
M-A-P
- - Byte connection
M-A-P
- Yes No
ST-SAM
O Bit Bit connection
M-A
- - Bit connection
M-A-P
- Yes No