User Manual

Use
The software package is required to connect the automation stations (AS) SIMATIC-S7
homogenously to the X-OS for the management level. This ensures communications,
among other functions, between X-OS and the AS, regardless of the transmission
protocols and bus systems:
• Industrial Ethernet
• PROFIBUS
Supported system
environment:
• SIMATIC S7-300 and SIMATIC S7-400
Hardware platform
• SICLIMAT TP 177
Local operator panel
• S7-WEB
Web-based operation
• SICLIMAT-X
Management systems /
stations
• PROFIBUS
Communication
• Feldbus : PROFIBUS-DP
• Ethernet
• SIMATIC MPI
• SICLIMAT engineering tool
Engineering
Function
In addition to the aforementioned functionality, the software package includes
additional functions that guarantee homogenous interaction between the
automation and management levels:
• Message buffer for Dynamic Change Of State (DCOS)
• "Time stamp" for messages to the automation station
• Life signs monitoring
• Time synchronization
• Downloadable automation station.
• Uploadable automation station
• Automated save function for meter measured values
• Data interface for test operations
• Peer-to-peer communications between automation stations
2/6
Siemens Building Technologies AS Connect to X-OS CK1N9922en
Building Automation 28.04.2008