User Manual

Fire Safety

Building Technologies 049_Archives_and_Libraries_A6

V10271399_a_en.doc

Fire Safety & Security Products 03.2009

4.5 Management Station

The Siemens Danger Management Station (DMS) allows central monitoring and

control of fire safety and security installations. It can be configured for local as well

as for remote facilities. It is the solution for the integration of diverse subsystem like

fire, access control, intrusion and CCTV. In addition, it can easily exchange infor-

mation with Siemens building automation management station Desigo or 3

party

management station.

Primary users of the system are security guards and members of the fire brigade

responsible for monitoring and managing the facilities. Other users will be the shift

managers who are responsible for performing site maintenance, investigating

event histories, and creating analytical reports based on the recorded historical

data.

4.5.1 MM8000 Management Station

The system is based on two software packages:

– MM8000

– MK8000 OPC Server

and two hardware components:

– MT8001

– NK8000

The MM8000 provides integrated management and handling, decentralized system

operation and centralized maintenance.

The MK8000 OPC Server provides open system solutions to our customers, ena-

bling our subsystems to be integrated into 3

party management systems. The ob-

jective is to offer the OPC Data Access (DA) Server product in parallel with com-

plete offerings including our MM8000 management station software. The OPC DA

Server product allows the Management Station to technically integrate FS subsys-

tems into building automation unit head-ends, thereby supporting the BT Total

Building Solutions offering.

The MT8001 Management Terminal provides a common user interface to Fire and

Intrusion subsystems of different generations. It provides control functionality at the

most convenient location for personnel trusted with the responsibility of reacting to

security events. These people may be security guards, but more commonly, they

may also be receptionists, concierges, janitors, or general technical service per-

sonnel.

NK8000 connects various subsystems over TCP/IP Ethernet or BACnet/IP to the

management station MM8000. The NK822x Ethernet Ports are used to connect lo-

cal and distributed safety and security devices to the NK8000 network. The

NK822x port provides a first level of centralization, and acts as a secure communi-

cation partner for management station. Additionally, the NK8223 / NK8225 can be

serially connected to a local management station.