User Manual

The benefits at a glance
Active and passive sensors for flush mounting that meet
all requirements
– Choice of active and passive sensors
– Configuration of active sensors
for output ranges DC 0...5 V,
0...10 V, 0...20 mA, 4...20 mA and
0/4...20 mA
– One relay output for measured vari
-
able-dependent single-stage control
(e.g. for switching ventilation in con
-
nection with humidity measurements)
– Optimum adaptation to individual
needs
Matching sensors for every type of application
– Sensors for flush mounting for
individual measured variables
– Multisensor acquires several
measured variables concurrently
– Measured variables: carbon dioxide
(CO
2
), volatile organic compounds
(VOC), temperature and humidity
– Housings without operating
elements for universal use, ideally
suited for public buildings, such as
schools
Straightforward and secure installation and operation
– Easy and error-free installation
of front modules on the base
modules with snap-on catches
(patent pending)
– Reliable anti-theft protection
by studs, which prevent unauthor-
ized removal of the front module
(patent pending)
