User Manual
Innovative technology
for versatile applications
Broad range of flush-mounted sensors
for all types of applications
The Symaro range for flush mounting in-
cludes not only sensors for temperature,
humidity and indoor air quality but also
multisensors for the simultaneous acquisi-
tion of up to three measured variables. In
addition, the sensors can be matched to
specific requirements, thanks to their wide
choice of configuration options, such as
active and passive output signals.
In KNX S-/LTE-Mode and KNX PL-Link, the
communicating sensors for flush mounting
can be integrated in the building automation
from Siemens – Desigo™ Total Room Auto-
mation (TRA), Synco™ or GAMMA. When
using KNX S-Mode, they can also be used in
connection with third-party systems.
All in harmony – thanks to uniform
room design
Symaro sensors blend perfectly into any
room surroundings: They can be fitted into
all types of commercially available recessed
conduit boxes – worldwide – and be freely
used with the frames of the DELTA switch
programs or with third-party products. This
way, the sensors can be matched to different
types of rooms or frame designs.
Enjoying a perfect feeling of comfort
while saving energy
Accurate and meaningful measured variables
ensure energy-efficient room control and
enhanced comfort. The sensors’ optimized
design enables them to acquire the mea
-
sured variables quickly and accurately. At the
same time, disturbances like the temperature
of the wall only have a small impact. Hence,
Symaro sensors for flush mounting are the
ideal basis for saving energy and costs.
Functionality that pays off
The communicating Symaro sensors are
products that can also be used as room
temperature or ventilation controllers or for
lighting and shading control.
Demand-controlled ventilation indicated
by LED
The room users’ ability to concentrate and
their well-being are ensured by ventilation
that maintains the CO
concentration of the
air at an optimum level. To save energy in
the process, the amount of outside air
supplied to the room should not exceed the
amount actually required. Symaro in-door air
quality sensors acquire the exact amount of
CO
contained in the room air or the amount
of mixed gases, which are, for example,
emitted by certain materials. The fan’s speed
is controlled depending on the measured
variables, thus saving energy. And the sen-
sors’ multicolor LED indicates whether the
indoor air quality is good, average, or poor.
Ease of handling
Thanks to their snap-on catches, Symaro
sensors for flush mounting are easy to
install. Only one sensor is needed to acquire
several measured variables, thus reducing
the effort for installation.
Highlights
• Significant energy savings
thanks to fast, highly accu-
rate measurements and low
internal power consumption
• Sensors of elegant design
for flush mounting, suited
for any type of room
• Extensive choice of colors
and designs of frames of the
DELTA switch program and
third-party products
• Multisensor with several
measuring parameters in
one device, ensuring lower
installation and wiring costs
• Adaptation to specific re-
quirements thanks to con-
figurable outputs
• KNX bus communication for
seamless integration
Symaro sensors in
DELTA switch design
for flush mounting
blend perfectly into
any surroundings.