Environmental Declaration

EPD - Type II
Based on ISO 14021
CEM1; halogenated; solder SnAgCu PCB-D093 2g
*Variant parts list
[g]
Total weight of device
Front Housing
Switch
Fuse holder
Fuse
Cable/wire
Comments
A5W00090846A 30.12.2019
Regulation (EC) No. 1907/2006 (REACH)
The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must
not be disposed of as unsorted municipal waste. Regarding disposal, use the systems setup for collecting electronic waste.
Observe all local and applicable laws.
Disposal
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Legal Disclaimer: This declaration is for information purpose only.
BSCE therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent under the law.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular
composition for a particular period.
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive, including the 4 phthalates added to Annex
II in 2015.
To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the
candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in concentrations above 0.1 % w/w. Contained REACH candidate substances, which will become known at a later date, are listed on the
delivery note.
(Status according to the creation date of this document.)
7
1
2
4
SEM62.1
1,004
74
SEM62.2
1,016
73
Restricted Page 2/2