Installation Instructions

Document No. 129-710
Installation Instructions
May 10, 2016
Siemens Industries, Inc. Page 7 of 10
Figure 2. Drive Mounting Plate.
2. Loosen the four screws corner screws and
remove the cover from the BT300 Drive.
Figure 3. Drive Cover Removal.
3. Remove the cable protection plate from the front
of the BT300 Drive.
Figure 4. Cable Protection Plate Removed.
4. Remove the cable gland bottom plate from the
BT300 drive.
Figure 5. Drive Gland Plate.
5. Install the required conduit fittings, sealing
washers, and secure the lock rings into the top
of the bypass enclosure and the BT300 gland
plate.
Figure 6. Conduit Fitting Installation (Typical).