User Manual

30/32
Siemens Building Technologies SED2 Advanced Operator Panel AOP CM1B5192en
HVAC Products Applicable Standards 19.01.2004
10 Applicable Standards
European Low Voltage Directive
The SED2 VSD product range complies with the requirements of the Low Voltage Directive 73/23/EEC
as amended by Directive 98/68/EEC. The units are certified for compliance with the following stan-
dards:
EN 60146-1-1 Semiconductor VSDs - General requirements and line commutated VSDs
EN 60204-1 Safety of machinery - Electrical equipment of machine
European Machinery Directive
The SED2 VSD series does not fall under the scope of the Machinery Directive. However, the products
have been fully evaluated for compliance with the essential Health & Safety Requirements of the direc-
tive when used in a typical machine application. A Declaration of incorporation is available on request.
European EMC Directive
When installed according to the recommendations described in this guide, the SED2 VSD fulfils all
requirements of the EMC Directive as defined by the EMC Product Standard for Power Drive Systems
EN50082-2.
Underwriters Laboratories
UL and CUL LISTED POWER CONVERSION EQUIPMENT 5B33 for use in a pollution degree 2
ISO 9001
Siemens SBT operates a quality management system, which complies with the requirements of ISO
9001.