User Manual

27/32
Siemens Building Technologies SED2 Advanced Operator Panel AOP CM1B5192en
HVAC Products AOP Setup & Configuration 19.01.2004
8.1.10 AOP Reset
Caution: The AOP reset function enables the deletion of all parameter sets and set-
tings, internal faults, and message logs stored in the AOP.
1. Use
and to highlight the AOP Reset option on the SETUP menu.
Press
to confirm the selection.
The AOP displays an AOP reset screen.
2. Use
and to select on or off to enable or disable the AOP reset function respectively.
Press
to confirm the selection.
Press
to cancel this selection and to return to the SETUP menu.
3. When you select off, the AOP disables the AOP reset function and returns to the SETUP menu.
When you select on, you will be prompted which way the AOP reset should occur.
If you want to reset the AOP and also delete all the parameter sets, press
If you want to reset only the AOP without deleting the parameter sets, press
.
Simultaneously press
and at any time to display relevant help screens.