User Manual

26/32
Siemens Building Technologies SED2 Advanced Operator Panel AOP CM1B5192en
HVAC Products AOP Setup & Configuration 19.01.2004
8.1.7 User Defined Text
With the following procedure, you can enter a user-defined text in the AOP:
1. Use
and to highlight User Defined Text option on the SETUP menu.
Press
to confirm the selection.
The AOP displays a user text screen.
2. Use
and to select an on or off user text status.
Press
to cancel this selection and to return to the SETUP menu.
Press
to confirm the selection and the AOP displays a text screen with the first character highlighted.
The text string can contain a maximum of 20 characters.
3. Use
and to scroll through the characters until the desired character is shown.
Press
to accept the character and to advance to the next character.
Repeat this step until the desired text is entered.
4. Press and hold
to except the text string and to return to the SETUP menu.
Press and hold
to cancel the text entry, restore the original text string, and to return to the SETUP menu.
8.1.8 Parameter Set Names
Use the following procedure to edit the names of the ten parameter sets stored in the AOP.
Note: This editing option is not available in the standard access level.
1. Use
and to highlight the Parameter Set Names option on the SETUP menu.
Press
to confirm the selection.
2. Use
and to scroll through the parameter sets (1-10) to highlight the parameter set whose name is to
be edited. Press
to confirm the selection.
3. The AOP displays now the name of the selected parameter with its first character highlighted.
Use
and to scroll through the characters until the desired character is shown.
Press
to accept the character and to advance to the next character.
Repeat this step until the desired text is entered.
4. Press and hold
to accept the text string and to return to the SETUP menu.
Press and hold
to cancel the text entry, restore the original text string, and to return to the SETUP menu.
8.1.9 Set Time/Date
1. Use and to highlight the Set Time/Date option on the SETUP menu.
Press
to confirm the selection.
The AOP displays a set time screen and highlights the first time field (hours).
2. Use
and to scroll through the digits until the desired hour (0-23) displays.
Press
to confirm the entry.
The cursor advances to the next time field (minutes [0-59], and then seconds [0-59]).
Repeat this step until the desired time (hours-minutes-seconds) is set.
3. The AOP displays a set day/date screen and highlights the first field (day of week).
Use
and to scroll through and highlight the desired day of week.
Press
to confirm the entry.
The cursor advances to the first date field (day of month).
4. Use
and to scroll through the digits until the desired day of the month (01-31) displays.
Press
to confirm the entry.
The cursor advances to the next date field (month [01-12], and then year [2000-2250]).
Repeat this step until the desired date (day-month-year) is set.
Press and hold the
key to accept the Day/Date settings and to return to the SETUP menu.