User Manual

24/32
Siemens Building Technologies SED2 Advanced Operator Panel AOP CM1B5192en
HVAC Products AOP Setup & Configuration 19.01.2004
8 AOP Setup & Configuration
8.1 Setup Menu
Using the SETUP option from the Main Menu of the AOP, you can personalize the following characteristics of
the AOP:
• Backlighting
• Screen Contrast
• Large Numbers
• Cursor Type
• Start Help
• Welcome Text
• Parameter Set Names (Expert Level and above only)
• User Defined Text
• Set Time/Date (Service Level only)
• AOP Reset
Use the following procedure to access the SETUP menu:
1. From the main menu, use
and to scroll through the list of options and to highlight the SETUP item.
Press
to confirm the selection. The AOP displays a SETUP menu.
2. Use
and to scroll through the SETUP menu and to highlight the desired option.
Press
to confirm the selection.
Note:
Simultaneously press and at any time to display the relevant help screens.
8.1.1 Backlighting
To activate the backlighting option on the AOP, the following procedure should performed:
1. Use
and to highlight the Backlighting option on the SETUP menu.
Press
to confirm the selection.
The AOP displays a backlighting selection screen.
2. Use
and to select either on, off or sec.off.
Press
to confirm the selection.
Note: When you select on or off for backlighting, the AOP returns to the SETUP menu.
3. When you select sec.off the AOP displays a backlighting time setting screen. The backlighting timer turns
off the AOP backlighting after a specified time period of operator inactivity (in seconds).
Use
and to set the timer period of inactivity (1…250 seconds).
Press
to confirm the setting and the AOP returns to the SETUP menu.
Note: When you select OFF for the backlighting timer, the AOP backlighting functions continuously.
8.1.2 Screen Contrast
1. Use and to highlight the Screen Contrast option on the SETUP menu.
Press
to confirm the selection.
2. Use
and to adjust the contrast level.
Press
to confirm the selection and the AOP returns to the SETUP menu.