User manual

Index 63
RAID 0 (striping), 40
RAID 1 (mirroring), 41
raidctl (Solaris command), 43 to 52
reset
manual system, 20, 22
scenarios, 32
reset (sc> command), 20
run levels
explained, 18
ok prompt and, 18
S
sc> commands
break,20
console,20
console -f,17
poweroff,20
poweron,20
reset,20
setlocator,30
setsc,8
showlocator,30
shownetwork,8
sc> prompt
about, 16, 25
accessing from network management port, 18
accessing from serial management port, 18
multiple sessions, 17
system console escape sequence (#.), 18
system console, switching between, 15
ways to access, 17
SER MGT, See serial management port
serial management port (SER MGT)
acceptable console device connections, 5
as default communication port on initial
startup, 2
configuration parameters, 6
default system console configuration, 4
using, 6
setlocator (sc> command), 30
setsc (sc> command), 8
showenv (OpenBoot command), 57
shownetwork (sc> command), 8
shutdown (Solaris command), 19, 22
Solaris commands
fsck,20
init, 19, 22
raidctl, 43 to 52
shutdown, 19, 22
tip, 10, 11
uadmin,19
uname,12
uname -r,12
suspending the operating system software, 21
system console
accessing via alphanumeric terminal, 13
accessing via terminal server, 9
accessing via TIP connection, 10
accessing with terminal server, 2
alphanumeric terminal connection, 2, 13
default configuration explained, 2, 4
default connections, 4
defined, 1
Ethernet attachment through network
management port, 3
multiple view sessions, 17
sc> prompt, switching between, 15
setting OpenBoot configuration variables for, 23
system reset scenarios, 32
system status LEDs
interpreting, 28
Locator, 30
T
terminal server
accessing system console from, 5, 9
connection through patch panel, 9
pinouts for crossover cable, 10
tip (Solaris command), 11
TIP connection
accessing system console, 10
accessing terminal server, 10
U
uadmin (Solaris command), 19
uname (Solaris command), 12
uname -r (Solaris command), 12