User manual

Chapter 3 Managing Disk Volumes 51
▼ To Delete a Hardware RAID Volume
1. Verify which hard drive corresponds with which logical device name and physical
device name.
See “Disk Slot Numbers, Logical Device Names, and Physical Device Names” on
page 43.
2. Determine the name of the RAID volume.
In this example, the RAID volume is
c0t1d0.
Note – The logical device names might appear differently on your system,
depending on the number and type of add-on disk controllers installed.
# raidctl
RAID Volume RAID RAID Disk
Volume Type Status Disk Status
------------------------------------------------------
c0t0d0 IM OK c0t0d0 OK
c0t1d0 OK