User manual

36 SPARC Enterprise T1000 Server Administration Guide • April 2007
▼ To Unconfigure a Device Manually
● At the sc> prompt, type:
The asr-key is one of the device identifiers from
TABLE 2-5
Note – The device identifiers are not case-sensitive. You can type them as uppercase
or lowercase characters.
▼ To Reconfigure a Device Manually
1. At the sc> prompt, type:
where asr-key is any device identifier from
TABLE 2-5
Note – The device identifiers are not case-sensitive. You can type them as uppercase
or lowercase characters.
You can use the ALOM CMT enablecomponent command to reconfigure any
device that you previously unconfigured with the disablecomponent command.
sc> disablecomponent asr-key
TABLE 2-5 Device Identifiers and Devices
Device Identifiers Devices
MB/CMPcpu-number/Pstrand_number CPU strand (Number: 0-31)
PCIEslot-number PCI-E slot (Number: 0)
MB/PCIEa PCI-E leaf A (/pci@780)
MB/PCIEb PCI-E leaf B (/pci@7c0)
MB/CMP0/CHchannel-number/Rrank-number/Ddimm-number DIMMS
sc> enablecomponent asr-key