User manual

30 SPARC Enterprise T1000 Server Administration Guide • April 2007
Controlling the Locator LED
You control the Locator LED from the sc> prompt or by the Locator button on the
front of the chassis.
FIGURE 2-1 Locator Button on the Front of the Server Chassis
● To turn on the Locator LED from the system controller command prompt, type:
● To turn off the Locator LED from the system controller command prompt, type:
● To display the state of the Locator LED from the system controller command
prompt, type:
Note – You do not need user permissions to use the setlocator and
showlocator commands
Automatic System Recovery
The system provides for automatic system recovery (ASR) from failures in memory
modules or PCI cards.
sc> setlocator on
sc> setlocator off
sc> showlocator
Locator LED is on.
Locator Button/LED