User manual

CCIC1410 Installation Wizard
31
Siemens Building Technologies
Fire Safety & Security Products 05.2009
Fig. 6 Wireless Settings page
z SSID (Service Set Identifier)
“SSID” is a name that identifies a wireless network. Access points and wireless
clients attempting to connect to a specific WLAN (Wireless Local Area Network)
must use the same SSID. The default setting is "default".
Note: The maximum length of SSID is 32 single-byte characters.
z Wireless mode
Click on the pull-down menu, and you can see the following options:
– “Infrastructure”
The device is connected to the WLAN via an Access Point (the default
setting).
– “Ad-Hoc”
The device is connected directly to a host equipped with a wireless adapter in
peer-to-peer mode.
– “Channel”
While in Infrastructure mode, the channel will be set automatically to the same
channel setting of the selected Access Point. While in Ad-Hoc mode, the