Gigaset SE505 dsl/cable / en / A31008-E505-B100-1-7619 / cover_front_SE505.fm / 16.07.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / 505_RouterIVZ.fm / 16.07.2003 Contents Contents Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 The Gigaset SE505 dsl/cable . . . . . . . . . . . . . . . . . . . 5 Features and applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Procedure for installation and configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 First Steps . . . . .
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / 505_RouterIVZ.fm / 16.07.2003 Contents The user interface . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Launching the user interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The start page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / 505_RouterIVZ.fm / 16.07.2003 Contents Administration of the Gigaset SE505 dsl/cable . . 91 Manually open or close an Internet connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Setting the time and time zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Set the time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / introduction.fm / 16.07.2003 Safety precautions Safety precautions ◆ Only use the mains adapter (12V 1A) that is supplied with the Gigaset SE505 dsl/ ◆ ◆ ◆ ◆ ◆ cable. Comply with the connection values and ratings when connecting the device to the mains. Protect the equipment from moisture. Never open the device. For electrical safety reasons it may only be opened by authorised service technicians. The router may affect medical equipment.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / introduction.fm / 16.07.2003 The Gigaset SE505 dsl/cable The Gigaset SE505 dsl/cable The Siemens Gigaset SE505 dsl/cable is a powerful but simple communications device for connecting your PC or local network (LAN) to the Internet (WAN). The Gigaset SE505 dsl/cable permits Internet access for several users. A single user account can be shared, if your Internet Service Provider permits this.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / introduction.fm / 16.07.2003 The Gigaset SE505 dsl/cable Features and applications The Gigaset SE505 dsl/cable's wide range of features make it ideal for a large number of applications, such as: ◆ Setting up a local network The Gigaset SE505 dsl/cable provides connections – for four devices via Ethernet ports with a transmission speed of 10 or 100 Mbps.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / introduction.fm / 16.07.2003 The Gigaset SE505 dsl/cable ◆ Protection against unauthorised access from the Internet The Gigaset SE505 dsl/cable offers comprehensive security measures such as: – Firewall All the PC's in the local network use the router's Public IP address for their Internet connections, which makes them 'invisible' on the Internet. The router only allows access from the Internet if it has been requested from the local network.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / introduction.fm / 16.07.2003 The Gigaset SE505 dsl/cable Procedure for installation and configuration 1. First install an Ethernet network card or a wireless Network adapter such as the Gigaset PCI Card 54 or Gigaset PC Card 54 in the PC's you want to connect with the Gigaset SE505 dsl/cable. The installation procedure can be found in the product's User Guide.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / device.fm / 16.07.2003 First Steps First Steps System requirements To operate your Gigaset SE505 dsl/cable you need ◆ a PC with – a Gigaset PCI Card 54, a Gigaset PC Card 54 or other 802.11g-compatible wireless Network adapter i You can also use an 802.11b-compatible network adapter such as the Gigaset PC Card 11 or Gigaset USB Adapter 11. However you will not be able to use the full transmission speed of the Gigaset SE505 dsl/cable of 54 Mbps.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / device.fm / 16.07.2003 First Steps Operating displays and connections Front panel LED displays The front panel of the Gigaset SE505 dsl/cable contains LED displays that show the operating state and simplify installation and fault finding in the network. The LED's show the following: LED Power WWW State Status On Off On Off The Gigaset SE505 dsl/cable is on. The Gigaset SE505 dsl/cable is off. There is an Internet connection.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / device.fm / 16.07.2003 First Steps LED WAN LAN1 LAN4 State Status On Flashing Off A DSL or cable modem is connected. The WAN port is sending or receiving data (traffic). There is no modem connected, or the Gigaset SE505 dsl/cable is off. A device is connected to the relevant LAN port. The LAN port is sending or receiving data (traffic). There is no device connected, or the Gigaset SE505 dsl/cable is off.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / device.fm / 16.07.2003 First Steps The back panel of the Gigaset SE505 dsl/cable houses the various sockets. Element 12V AC Description Socket for the mains adapter supplied. Warning: Using the wrong power supply unit may damage the router. Reset Reset function. Use this button to ◆ boot the router. To do this hold the button down for one second. ◆ reset all settings to the factory default settings (see page 108).
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / device.fm / 16.07.2003 First Steps Setting up the Gigaset SE505 dsl/cable The Gigaset SE505 dsl/cable can be set up in any suitable location in the home or office. You do not need any special wiring. However you should comply with the following guidelines: ◆ Operate the Gigaset SE505 dsl/cable only indoors within a temperature range of +5 to +40 °C. Do not position the Gigaset SE505 dsl/cable near a heat source. Do not cover the ventilation slots.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / device.fm / 16.07.2003 First Steps Connecting a DSL or cable modem to the router Connect the socket on the back of the router marked WAN and your DSL or cable modem with an Ethernet cable. Gigaset SE505 dsl/cable DSL or cable modem i 14 Use a 100-Ohm shielded or unshielded 3, 4 or 5 category Ethernet cable with RJ-45 jacks on both ends for all connections.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / device.fm / 16.07.2003 First Steps Creating a LAN connection You can connect PC's to your router in wireless or wired mode and so set up a local area network (LAN). Wireless A wireless connection is established by a wireless network adapter installed in your PC. This can be a Gigaset PCI Card 54, Gigaset PC Card 54 or other 802.11g or 802.11b compatible wireless network adapter.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / device.fm / 16.07.2003 First Steps Wired Insert one end of the supplied Ethernet cable in one of the LAN sockets (LAN1 - LAN4) on the back of the router and the other end in the PC's Ethernet network card. The four LAN sockets can automatically set the transmission speed to 10 Mbps Ethernet or 100 Mbps Fast Ethernet and the transmissions mode to Half duplex or Full duplex depending on the performance of the network adapter in your PC.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / device.fm / 16.07.2003 First Steps Activating Connect the mains adapter cable to the 12V 1A socket on the router. Plug the mains adapter into a mains socket. This activates the Gigaset SE505 dsl/cable. The power LED on the front lights up and the WAN LED flashes, indicating that a modem is connected. Flashing LAN LED's indicate when a device is connected to the corresponding LAN connection.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Configuring the local network Once you have set up the hardware and connected all the devices, you have to configure the network settings of all the PC's that will communicate with each other via the Gigaset SE505 dsl/cable. The LAN is set up as a TCP/IP network. You will have to make certain choices during the configuration procedure.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Network configuration for Windows 98, 98 SE, ME To integrate a PC with Windows 98, 98 SE or ME in a local network, you must carry out the following steps: 1. Set up the PC as the Client for Microsoft Networks (see below). 2. Select computer names and workgroup (see page 20). 3. Install the TCP/IP protocol (see page 21). 4. Make TCP/IP protocol settings (see page 22). 5.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network ◆ Select in Manufacturers the entry Microsoft and in Network clients the entry Client for Microsoft Networks. ◆ Confirm this with OK. Selecting a computer name and workgroup You now have to specify a name for the PC and assign it to a workgroup. ◆ In the Network window move from the Configuration tab to the Identification tab.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Installing the TCP/IP protocol. The TCP/IP protocol ensures that the PC's in the network can communicate with each other. You must first install this Protocol for the network adapter that establishes the connection to the Gigaset SE505 dsl/cable. ◆ In the Network window move from the Identification tab to the Configuration tab.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network TCP/IP protocol settings The TCP/IP protocol requires certain settings which you will now make so that it can function smoothly. ◆ To do this, open the Configuration tab in the Network window. ◆ Select the TCP/IP > entry for your network card. ◆ Click on Properties.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network ◆ Open the IP Address.tab. ◆ If Obtain an IP address automatically has already been activated, your PC is already configured for DHCP. Click on Cancel and close the next windows with OK to run network configuration. You may be prompted to insert your Windows Installation CD. Follow the instructions in the installation procedure.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network ◆ Open the Gateway tab and remove any entries from the Installed Gateways list.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network ◆ Open the DNS Configuration tab. Select Deactivate DNS. ◆ Click on OK. ◆ Finish the network configuration with OK. You may be prompted to insert your Windows Installation CD. Follow the instructions in the installation procedure. Once the copying procedure is completed, you will be prompted to reboot your system. Click on Yes. The computer will then be rebooted.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Deactivating the http proxy Make sure that the http proxy in your Web browser is deactivated. This function must be deactivated so that your Web browser can access your Gigaset SE505 dsl/cable's configuration pages. The following section describes the procedure for Internet Explorer and Netscape. First decide which browser you are using and then follow the appropriate steps.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Synchronising the TCP/IP settings with the Gigaset SE505 dsl/cable You have now configured your PC so that it is ready to be connected to the Gigaset SE505 dsl/cable. You now have to release the old TCP/IP settings and match them to the settings of your Gigaset SE505 dsl/cable. ◆ Click on Start – Run. ◆ Type WINIPCFG and click on OK.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Network configuration with Windows XP To integrate a PC with Windows XP into a network that is configured with a Gigaset SE505 dsl/cable: 1. Configure the network (see below). 2. Select computer names and workgroup (see page 30). 3. Check the network settings and complete the installation procedure (see page 30). 4. Make TCP/IP protocol settings (see page 31). 5.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network You will be prompted to select a connection method. ◆ Select Other Method and confirm with Next. You will now see a screen listing various connection methods. ◆ Select This computer connects directly to the Internet. The other computers on my network connect to the Internet through this computer. and click on Next.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Selecting a computer name and workgroup You now have to specify a name for the PC and assign it to a workgroup. ◆ Enter the name the PC is to appear under in the network. This name must be unique within the network. You can complete the Computer description box or leave it empty. Then click on Next. ◆ Enter a name for the workgroup the computer is to belong to.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network TCP/IP protocol settings The TCP/IP-Protocol requires certain settings which you should now make or check so that it can function smoothly. ◆ Click on Start and select Control Panel. ◆ Select Network and Internet connections and then click on the Network connections icon. ◆ Double click on the LAN connection with which you are connected to the router.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network ◆ Click on Properties. ◆ Select Internet protocol (TCP/IP) and click on Properties.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network ◆ If the Obtain an IP address automatically and Obtain DNS server address automatically options have already been activated, your PC is already configured for DHCP. Click on Cancel and close the next windows with OK to save your network configuration.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Deactivating the http proxy Make sure that the http proxy in your Web browser is deactivated. This function must be deactivated so that your Web browser can access your Gigaset SE505 dsl/cable's configuration pages. The following section describes the procedure for Internet Explorer and Netscape. First decide which browser you are using and then follow the appropriate steps.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Synchronising the TCP/IP settings with the Gigaset SE505 dsl/cable You have now configured your computer so that it is ready to be connected to the Gigaset SE505 dsl/cable. You now have to release the old TCP/IP settings and synchronise them with the settings of your Gigaset SE505 dsl/cable.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Network configuration with Windows 2000 To integrate a PC with Windows 2000 into a network that is configured with a Gigaset SE505 dsl/cable: 1. Install the network services (see below). 2. Select computer names and workgroup (see page 37). 3. Install the TCP/IP protocol (see page 38). 4. Make TCP/IP protocol settings (see page 40). 5. Deactivate the http proxy (see page 42). 6.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network ◆ Select Networking Services and click on Next. ◆ You will now be prompted for the Windows installation CD. Insert the WIN2000 CD and click on the OK button to install all the required components. Selecting a computer name and workgroup You now have to specify a name for the PC and assign it to a workgroup.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Installing the TCP/IP protocol. The TCP/IP protocol ensures that the PC's in the network can communicate with each other. You now have to install this Protocol. ◆ Right click to open Local Area Connection. ◆ In the next window click on Properties. ◆ Click on Install.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network ◆ Select Protocol and click on Add. ◆ In the Network Protocols list, select the entry Internet protocol (TCP/IP). ◆ Click on OK. You will now see the TCP/IP protocol in the Local Area Connection Properties window.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network TCP/IP protocol settings The TCP/IP protocol requires certain settings which you will now make or check so that it can function smoothly. ◆ Select Internet protocol (TCP/IP) and click on Properties.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network ◆ If the Obtain an IP address automatically and Obtain DNS server address automatically options have already been activated, your PC is already configured for DHCP. Click on Cancel and close the next windows with OK to save your network configuration.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Deactivating the http proxy Make sure that the http proxy in your Web browser is deactivated. This function must be deactivated so that your Web browser can read your Gigaset SE505 dsl/cable's configuration pages. The following section describes the procedure for Internet Explorer and Netscape. First decide which browser you are using and then follow the appropriate steps.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Synchronising the TCP/IP settings with the Gigaset SE505 dsl/cable You have now configured your computer so that it is ready to be connected to the Gigaset SE505 dsl/cable. You now have to release the old TCP/IP settings and synchronise them with the settings of your Gigaset SE505 dsl/cable. ◆ Click on Start – Programs – Accessories – Command prompt in Windows Desktop.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003 Configuring the local network Checking the connection to the Gigaset SE505 dsl/cable Once the network has been set up on a PC, you can check whether the PC has been successfully connected to the Gigaset SE505 dsl/cable. This can be done as follows: ◆ Open Command prompt. This can be done by clicking on Start – Programs – Command prompt. ◆ Enter the command ping 192.168.2.1.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 The user interface The user interface Once you have configured the network settings on a PC in your local network, you can then use that PC to configure the Gigaset SE505 dsl/cable with the router's user interface. The Gigaset SE505 dsl/cable can be configured using any browser that supports Java, e.g. Microsoft Internet Explorer 5.5 or higher, Netscape Communicator 6.0 or higher.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 The user interface You will now see the start page. Selecting the language The first time you launch the user interface it will appear in English. If you do not want to change the language, you can skip this section. ◆ If you wish to change the user interface language to German, French, Italian, Spanish or Dutch, select the required language from the Select your language pick list.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 The user interface ◆ Load the installation CD supplied into your CD-ROM drive and click on Browse. ◆ Select your language file in the file selection screen and click on Open. The file you want is on the CD-ROM in the directory for the corresponding country, and has the format siemens_nn.x.yy.zz, nn being the symbol for the required language: de Germany fr France it Italy nl Netherlands sp Spain x.yy.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 The user interface The start page The start page is the starting point for all configuration and administration activities.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 The user interface Basic Setup Use Basic Setup for the settings required for connecting to the Internet via a DSL or cable modem. This is described from page 52 on. Security Setup The Security Setup allows you to take precautions against unauthorised access to your router and LAN. For example, you can assign a password and set up encryption for wireless transmissions. This is described from page 63 on.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 The user interface UI elements The UI pages contain the following elements: Title bar Navigation bar Working area Buttons Title bar The title bar indicates whether you are in Basic Setup, Security Setup or Advanced Setup, or whether a status page is open. Navigation bar The navigation bar always displays Home. It finishes the setup or closes the status screen and returns to the start screen.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 The user interface As soon as you have changed the configuration in a screen, you can activate the new setting by clicking on APPLY or NEXT at the bottom of the screen. i Please read the following information if you are using Internet Explorer 5.0.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 General configuration with Basic Setup General configuration with Basic Setup Use Basic Setup for the general configuration of the Gigaset SE505 dsl/cable. This includes the settings for the WAN interface. The router's WAN interface is used to provide a connection to the Internet for all the PC's connected to the router.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 General configuration with Basic Setup Configuring Internet access In the next step you have to enter the data for your Internet connection. You will have received the necessary information from your Internet Service Provider (ISP). If you have chosen Germany as your country, please read the next section. If you have chosen a different country, please turn to page 56.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 General configuration with Basic Setup T-Online ◆ Enter the access data you have been given by T-Online. ! Select manual connect if you always wish to connect manually to the Internet. This can save connection charges if you use a time-base rate. Manually opening and closing a connection is detailed on page 91.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 General configuration with Basic Setup 1&1 ◆ Enter the access data you have been given by 1&1. ! Select manual connect if you always wish to connect manually to the Internet. This can save connection charges if you use a time-base rate. Manually opening and closing a connection is detailed on page 91.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 General configuration with Basic Setup Other Internet Service Providers First select the type of your Internet connection. The options are: ◆ PPPoE (see page 57) Standard connection type for connections using DSL modem. ◆ Dynamic (see page 58) Connection type for connections with dynamic IP address. ◆ Static IP address Connection type for connections with fixed IP address.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 General configuration with Basic Setup Configure connection for DSL modem with PPPoE Complete this screen if you dial up the Internet with a DSL modem with PPPoE. ◆ Enter the User name and the Password which you have been given by your Internet Service Provider. ◆ Type the password again in the Retype password window. ! Select manual connect if you always wish to connect manually to the Internet.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 General configuration with Basic Setup Configure connection with dynamic IP address Complete this screen if your Internet Service provider has given you a Dynamic IP address for your Internet connection. In this case your router is a DHCP Client. ◆ If you have been given a host name by your Internet service provider, please enter it in the Host name window.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 General configuration with Basic Setup Configure IP address connection Complete this screen if your Internet Service provider has given you a Static (fixed) IP address for your router. ◆ Enter the data which you have received from your Internet Service Provider in the IP Address, Subnet Mask and Default Gateway dialog boxes. ◆ You can specify the IP address of a preferred DNS server in the DNS (optional) box.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 General configuration with Basic Setup Configure connection with PPTP Complete this screen if you connect to the Internet using a DSL modem with the Pointto-Point Tunneling Protocol (PPTP). ◆ If your Internet Service Provider has given you a Static (fixed) IP address for your router, select the manually option next to Receipt of IP address and enter the IP address and the subnet mask you have been given.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 General configuration with Basic Setup Testing the WAN connection and completing the configuration In the next step you can test whether your Internet access is working correctly. ◆ To start the connection test, click on Start test. This opens a window in which you will see the test steps and the test result.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 General configuration with Basic Setup ◆ Close the test window. ◆ If the test is successful, click on NEXT. ◆ In the next screen, click FINISH to complete your setup. Your router will now try to open a connection to the Internet. A successful Internet connection is indicated on the router's start screen by a revolving world icon and the word Connected. Your router is now configured and ready to use.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuring security measures Configuring security measures In the Security Setup you can configure additional settings that will enhance your network's security.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuring security measures Setting the SSID and making it invisible Before the wireless network components can communicate with each other, you must use the same SSID (Service Set Identifier). The Gigaset SE505 dsl/cable comes supplied with the SSID configured as ConnectionPoint. For security reasons you should change this SSID and deactivate the broadcast function (SSID visible).
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuring security measures ◆ SSID visible If you have selected this option the Gigaset SE505 dsl/cable will send the SSID in all data transmissions. In this case eavesdroppers could use the SSID to gain access to your network. Your router's SSID will also be displayed on PC's with a wireless network adapter.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuring security measures Allowing selected PC's access your local network In this next step you can specify up to 32 PC's that are allowed to access your LAN. All other computers will be denied access. Access control is based on the MAC address of the specified PC's. The access control is disabled by default. This means that all PC's that use the correct SSID can log in.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuring security measures Saving the router configuration and completing the setup In the last step of the Security Setup you can backup the current settings of your router in a file and save them on your PC or other data medium. You can then use that file to restore the current configuration of your router if necessary.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup Configuration with Advanced Setup In Advanced Setup you can configure all the Gigaset SE505 dsl/cable options. If you want, you can also make changes to the settings which you made in Basic Setup or Security Setup. The following table shows the options available in Advanced Setup.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup Configuring wireless connections If you want to connect PC's together in wireless mode with the Gigaset SE505 dsl/cable, then you must configure the router as the Access point of a wireless network (WLAN). You should also take steps to enhance the security of your wireless network. Use Wireless Settings for this configuration.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup ◆ SSID Before the wireless network components can communicate with each other, you must use the same SSID (Service Set Identifier). The Gigaset SE505 dsl/cable comes supplied with the SSID configured as ConnectionPoint. You should change this SSID for security reasons. Enter a character string of your choice. The SSID is case sensitive.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup ◆ Transmission mode The transmission mode indicates whether the wireless transmission complies with IEEE Standard 802.11b or IEEE 802.11g, or whether both transmission modes are possible (Mixed mode). The main difference between the two standards is the Transmission rate: IEEE 802.11b – maximum 11 Mbps, IEEE 802.11g – maximum 54 Mbps.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup Access control to local network In this screen you can specify which PC's will have access to your router and hence to your LAN. ◆ In the Wireless Settings menu, select Access control. The default setting for access control is disabled. This means that all PC's that use the correct SSID can log in. Access control is based on the MAC addresses of the network adapters of the PC's.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup LAN Configuration You can use LAN configuration to ◆ define an IP address for the router (see below), ◆ enable or disable the router's UPnP functionality (see page 77) and ◆ configure the router's DHCP server (see page 78). Defining the router's private IP address You can change the router's IP address in this screen. The default IP address for the router is 192.186.1.1.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup Using the universal plug and play function PCs with UPnP (Universal Plug & Play) can offer their own network services and automatically use services offered on the network. i The PC must have Windows ME or Windows XP as its operating system. Check whether the UPnP function has been installed in your PC's operating system.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup Configuring the DHCP server The router has a DHCP Server, whose factory setting is active. As a result, the IP addresses of the PC's are automatically assigned by the router. If you want to assign static IP addresses for the PCs, you will have to deactivate the DHCP server.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup ◆ IP Pool Range In IP Pool Range enter the range of IP addresses which the router should use for automatically assigning IP addresses to the PC's. Enter the first and last addresses. i The first three fields of the first and last IP address always have the first three fields of the router's IP address as their default setting because the subnet mask is always 255.255.255.x.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup WAN Configuration Once you have configured your router with the Basic Setup, you have already configured the WAN connection (Internet access) of your router. Use the WAN configuration option in Advanced Setup to check and change these settings. You can also change the operating mode of the Gigaset SE505 dsl/cable.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup Configuring as a Router When you select Router mode, the various WAN connection types are shown. ◆ Click on the connection type you are using. You will now see the corresponding configuration parameters (PPPoE in this example).
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup The following connection types are available: ◆ Select PPPoE, if you use PPP over Ethernet (PPPoE) for your WAN connection (e. g. for T-DSL (T-Online)). Configuration is similar to Basic Setup, as described on page 57.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup This opens a window in which you will see the test steps and the test result (see page 61). If the test fails, check that – all the necessary cables are connected – the various devices are connected to the power supply – the necessary LED's light up If you cannot find any hardware problems, check your settings again. ◆ Close the test window. ◆ Click on APPLY to apply the setting.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup Filtering Internet access You can use the Filter menu to make settings that will enhance the security of your network. You can ◆ protect your LAN against ping attacks from the Internet (see below), ◆ restrict Internet access to selected PC's and for selected services (see below), and ◆ restrict access by members of your LAN to selected websites (see page 85).
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup Restricting access to certain Internet domains and sites You can prevent members of your LAN accessing certain Internet domains and sites by defining a filter for URL's. Filtering a URL means that the specified URL and all of the URL's downstream of it are blocked for access. Specifying a domain name blocks the complete domain with all of its dependent URL's.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup Opening the firewall for selected PC's (DMZ) PC's inside the LAN cannot be accessed from the Internet by default. The router protects the LAN by its Firewall. Some applications do not work properly behind a firewall because they require unrestricted data flow in both directions. In this case you can define a so-called demilitarised zone (DMZ) for a PC running such applications.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup Port Forwarding Port Forwarding (the forwarding of requests to particular ports) is needed when you wish to operate Server services for the Internet on a PC in your LAN. For example, on one of your PC's you could run a Web server which provides HTML pages.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003 Configuration with Advanced Setup Activating dynamic DNS A service which you wish to provide on the Internet can be accessed by a Domain name. Your router's Public IP address is assigned to this Domain name. If your Internet Service Provider assigns the IP address for your local network's WAN connection dynamically, then the IP address of the router may change.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable Administration of the Gigaset SE505 dsl/cable The Gigaset SE505 dsl/cable user interface includes several helpful functions for administering your router.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable Setting the time and time zone To set the time or the time zone on your router, proceed as follows: ◆ In the Administration menu, select Time. Set the time You can set the time on your router in one of two ways: ◆ Manually To do this, select the manual option in the Set Time By window.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable Setting the Time Zone Information about the time zone is important for various time-dependent operations on the Internet. For example, the data packets sent in a particular country have to be sorted in the correct chronological order in the receiver's country. Access control to particular services can also be defined using time-based rules.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable Router management You can use the administration functions of your router ◆ to set a password for your router's configuration environment, ◆ to select a PC for Remote Management and ◆ to restart the router. This is done as follows: ◆ In the Administration menu, select Management.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable ◆ Type the password again in the Reenter new password window. The password may contain up to 32 characters. It is not case sensitive. Avoid proper names and all too obvious words. Use a combination of letters, numbers and special characters. If you ever forget the password you will have to reset your router (see page 108).
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable Firmware Upgrade You should perform a firmware upgrade when ◆ Siemens issues a new firmware release or ◆ you wish to use a language that is not preset in the router (the preset languages are English and German). Please refer to the description on page 46. If you wish to load the latest firmware on your router you will first need the new firmware release.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable ◆ The next window will warn you that the router will not be available for about a minute during the upgrade procedure. Acknowledge this message promptly with OK. ! Some browsers abort the upgrade process if you do not click on OK immediately. The firmware will now be updated. ! Do not switch the router off during the upgrade procedure.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable Saving and restoring a configuration Once you have configured your router, it is advisable to back up the settings. Then you can restore them at any time, should they be accidentally deleted or overwritten. ◆ In the Administration menu, select Backup and Restore. Save configuration data ◆ Click on Backup.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable Displaying the router's Status The Status screens show information about the router's configuration and connection status.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable Overview The Overview screen displays the following information: Service Set Identifier (SSID) Your router is identified in the wireless local network by this identifier. You must use this SSID for all additional PC's which you wish to log on to your router. Internet Connection Indicates the type of Internet access.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable Wireless The Wireless screen displays the following information: Service Set Identifier (SSID) Your router is identified in the wireless local network by this identifier. You must use this SSID for all additional PC's which you wish to log on to your router. You can change this ID in the Advanced Setup using the Wireless Settings - Basic Settings option.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable PC's in the Local Network You will find information about the PC's currently logged on to the router on the page entitled PC's in the Local Network. PC Name Name of the PC (if any), e.g. (MyWindowsPC). IP Address IP address of the PC in the local network. MAC address The hardware address of the network adapter with which the PC is connected to the router.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable Internet The Internet screen displays the following information: Router Operating Your router can be used as a router for Internet connections or as a Mode bridge to connect the wireless local network to other local networks (e.g. Ethernet). You can change this setting in the Advanced Setup with the WAN option.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / admin_router.fm / 16.07.2003 Administration of the Gigaset SE505 dsl/cable IP Address Shows the IP address of your router on the Internet (Public IP address). This is different from the IP address which your router has in the local network (Private IP address). The public IP address is assigned to the router by your ISP. Subnet Mask Indicates the router's Subnet mask on the Internet. This subnet mask is assigned by your ISP.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / appendix.fm / 16.07.2003 Appendix Appendix Fault tracing This chapter describes common problems and their solution. The Gigaset SE505 dsl/ cable is easy to monitor thanks to its LED displays. Problems can be quickly identified. If you cannot solve the connection problem after checking the LED displays, please consult the other sections of the following table. Symptom Possible cause and solutions Power lamp does not light up. No power supply.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / appendix.fm / 16.07.2003 Appendix Symptom Possible cause and solutions You cannot connect to the Internet. ◆ Check that you are using the right cable to connect to the modem. Depending on the modem you are using, the cable must have either straight or cross wiring. Please consult your modem operating instructions. The Ethernet cable supplied has straight wiring.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / appendix.fm / 16.07.2003 Appendix Symptom Possible cause and solutions No connection to the router's ◆ Use the ping command to check whether you can establish a network connection to the Gigaset configuration environment SE505 dsl/cable. ◆ Check the network cable between the PC you want to use to administer the router and the Gigaset SE505 dsl/cable.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / appendix.fm / 16.07.2003 Appendix Restoring the Router's factory settings If you have made configuration settings on the router in error, with the result that you can no longer access the router's configuration interface, you can reset the router to its factory settings.
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / appendix.fm / 16.07.2003 Appendix Specifications Interfaces 1 WAN Interface 10Base-T/100Base-TX, Autosensing 4 LAN Interfaces 10Base-T/100Base-TX, Autosensing RJ45 Radio characteristics Frequency range 2400 to 2484 GHz ISM band (subject to local regulations) Spreading Direct Sequence Spread Spectrum (DSSS) Modulation CCK, OFDM Number of channels IEEE 802.11b: 13 (Europe, ETSI) IEEE 802.11g: 13 (Europe, ETSI) Transmission rate IEEE 802.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.2003 Service (Customer Care) You have access to straightforward support concerning with technical aspects of your device and how to operate it through our Online Support on the Internet: www.my-siemens.com/customercare or you can refer to the section "Fault tracing" on page 105.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.2003 Kundeservice (Customer Care) Hvis brugen af telefonen giver anledning til spørgsmål, kan du få fat i os via vores onlinesupport på web-adressen www.my-siemens.dk/service 24 timer i døgnet. Her kan du få enkel og let tilgængelig hjælp ved tekniske spørgsmål og spørgsmål vedrørende betjening af din telefon.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.2003 Producentens garanti (Danmark) Slutbrugeren ydes en af forhandleren uafhængig fabriksgaranti på nedenstående vilkår: ◆ Hvis der inden for de første 24 måneder efter køb opdages mangler på udstyret og de tilhørende komponenter som følge af produktions- og materialefejl, kan Siemens frit vælge, om man vil foretage ombytning med et nyt, tidssvarende udstyr eller afhjælpe manglen gennem reparation.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.2003 Asiakaspalvelu (Customer Care) Online-tukisivumme Internetissä: www.my-siemens.com/customercare Tuotteitamme koskevaa henkilökohtaista neuvontaa saat soittamalla HelpDesk-numeroomme: Suomi 09-22943700 aukioloaika: maanantai - perjantai klo 9 - 18 Sinua palvelevat Siemensin asiantuntevat työntekijät, joilta saat tietoa tuotteista ja niiden asennuksesta. Käänny vikatapauksissa Siemens HelpDeskin puoleen.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.2003 Takuuehdot (Suomi) Tämä takuu ei rajoita niitä oikeuksia, joita laitteen käyttäjällä (ostajalla) on jälleenmyyjää kohtaan. Valmistaja myöntää laitteelle ja niiden osille seuraavien takuuehtojen mukaisen takuun: ◆ Siemens vastaa uusissa laitteissa ja niiden osissa ilmenevistä materiaali- ja valmistusvirheistä kahden vuoden ajan kuitissa näkyvästä ostopäivämäärästä lukien.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.2003 Kundservice (Customer Care) Behöver du hjälp med telefonen kan du kontakta inköpsstället. Du är givetvis även välkommen att kontakta oss www.my-siemens.com/customercare Frågor kring nätet och tjänster ställs till din operatör. HelpDesk 09-22943700 Se till att du har tillgång till kvittot. I länder där vår produkt inte säljs via auktoriserade återförsäljare erbjuds ingen bytesresp. reparationsgaranti.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.2003 Garantivillkor (Sverige) Denna garanti begränsar inte de rättigheter som användaren (köparen) av enheten har gentemot återförsäljaren. Tillverkaren beviljar garanti för enheten och dess komponenter enligt följande garantivillkor: ◆ Siemens ansvarar för fel i material och utförande som uppstår i nya enheter och tillhörande komponenter under två år efter det inköpsdatum som framgår av kvittot.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.2003 Kundeservice (Customer Care) Vår online-brukerstøtte på Internett: www.my-siemens.com/customercare I forbindelse med nødvendige reparasjonsarbeider eller evt. garantikrav får du rask og pålitelig bistand hos våre servicesentre 22 70 84 00 Hold kjøpsdokumentet klart når du tar kontakt. I land der vårt produkt ikke selges av autoriserte forhandlere, blir det ikke tilbudt utskiftings- eller reparasjonsarbeider.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.2003 Garanti (Norge) Gyldighet Denne apparatgarantien gjelder for sluttbrukeren ("Kunden"). Kundens lovfestede krav overfor forhandler/selger blir ikke ugyldiggjort eller begrenset av denne garantien. ◆ Garantien omfatter de leverte apparatene med alle tilhørende deler, men ikke installasjon, konfigurasjon og tjenester som er utført av forhandler. Håndbøker og evt.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.2003 Garantiperiode ◆ Lovfestede minimumsperioder for tilsvarende garantier vil alltid gå foran våre regler, men ikke mer enn 24 måneder. ◆ Garantiperioden begynner den datoen kunden kjøper apparatet. ◆ En utført garantiytelse medfører ikke at garantiperioden forlenges. ◆ Garantiytelser behandles over hele landet i våre kundeservicesentre.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.2003 Serviço de Apoio Clientes (Customer Care) O nosso Serviço de Apoio a Clientes na Internet: www.my-siemens.com/customercare No caso de ser necessário reparar os equipamentos, que estejam dentro da garantia, poderá obter ajuda rápida e credível em: Serviço de Apoio a Clientes Telefone: 21 417 85 85 E-mail: customer.care@siemens.com Por favor, conserve disponível o recibo da compra.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / customer_care.fm / 16.07.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / glossary.fm / 16.07.2003 Glossary Glossary Access point An Access Point, such as the Gigaset SE505 dsl/cable, is the centre of a wireless local network (WLAN). It handles the connection of the wireless linked network components and regulates the data traffic in the wireless network. The Access Point also serves as an interface to other networks, e.g. an existing Ethernet LAN or via a modem to the Internet.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / glossary.fm / 16.07.2003 Glossary DHCP Dynamic Host Configuration Protocol DHCP handles the automatic assignment of IP addresses to network components. It was developed because in large networks – especially the Internet – the defining of IP addresses is very complex as participants frequently move, drop out or new ones join.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / glossary.fm / 16.07.2003 Glossary Dynamic IP address A dynamic IP address is assigned to a network component automatically by the DHCP. This means that the IP address of a network component can change with every login or at certain intervals. See also: Static (fixed) IP address DynDNS Dynamic DNS Domain Name Service (DNS) is used to assign Domain names and IP addresses.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / glossary.fm / 16.07.2003 Glossary http proxy An http proxy is a Server that network components use for their Internet connections. All requests are sent via the proxy. Hub A Hub connects several network components in a star-topology network by sending all the data it receives from one network component to all the other network components.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / glossary.fm / 16.07.2003 Glossary IP address An IP address is the unique network-wide address of a network component in a network based on the TCP/IP protocol (e.g. in a local network (LAN) or on the Internet). The IP address has four parts (decimal numbers) separated by periods (e.g. 192.168.2.1). The IP address comprises the network number and the computer number.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / glossary.fm / 16.07.2003 Glossary Mbps Million bits per second The transmission speed in a network. MRU Maximum Receive Unit The MRU defines the maximum user data volume within a data packet. MTU Maximum Transmission Unit The MTU defines the maximum length of a data packet that can carried over the network at a time.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / glossary.fm / 16.07.2003 Glossary PPPoE Point-to-Point Protocol over Ethernet PPPoE is a Protocol for connecting network components in a local Ethernet network to the Internet via a modem. PPTP Point-to-Point Tunneling Protocol An Internet connection using PPTP Protocol that creates a "tunnel" within an Internet connection for a secure private connection in which the data are sent in encrypted form.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / glossary.fm / 16.07.2003 Glossary SMTP Simple Mail Transfer Protocol The SMTP Protocol is part of the TCP/IP protocol family. It regulates the exchange of electronic mail on the Internet. Your Internet Service Provider provides you with access to an SMTP server. SSID Service Set Identifier The SSID is used to identify the stations in a wireless network (WLAN). All wireless network components with the same SSID form a common network.
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / glossary.fm / 16.07.2003 Glossary Tunneling Tunneling is a procedure in which the data traffic of one Protocol is transmitted with the help of a different protocol. For example, data packets of a private network can be packed into IP packets and sent over the Internet as if through a tunnel. Tunneling procedures are used nowadays for the secure transmission of data in a Virtual Private Network (VPN).
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / glossary.fm / 16.07.2003 Glossary Wireless network See WLAN WLAN Wireless LAN Wireless LANs enable network components to communicate with a network using radio waves as the transport medium. A wireless LAN can be connected as an extension to a wired LAN or it can form the basis for a new network. The basic element of a wireless network is the so-called cell. This is the area where the wireless communication takes place.
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / 505_RouterSIX.fm / 16.07.2003 Index Index Numerics 10 Mbps . . . . . . . . . . . . . . . . . . . . . . 16 10/100 Mbps Switch Port . . . . . . . . . . 12 100 Mbps . . . . . . . . . . . . . . . . . . . . . 16 128 bit key . . . . . . . . . . . . . . . . . 67, 74 64 bit key . . . . . . . . . . . . . . . . . . 67, 74 A Access control . . . . . . . . . . . . . . . . . . 75 Access point . . . . . . . . . . . . . . . 71, 124 name. . . . . . . . . . .
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / 505_RouterSIX.fm / 16.07.2003 Index DHCP Service see DHCP Digital Subscriber Line see DSL DMZ . . . . . . . . . . . . . . . . . . . 7, 87, 125 DNS . . . . . . . . . . . . . . . . . . . . . . . . 125 DNS Configuration Windows 2000 . . . . . . . . . . . . . . . 41 Windows 98 . . . . . . . . . . . . . . . . . 25 Windows XP . . . . . . . . . . . . . . . . . 33 DNS Server . . . . . . . . . . . . . . . 104, 125 Domain name . . . . . . . . . .
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / 505_RouterSIX.fm / 16.07.2003 Index ipconfig / release . . . . . . . . . . . . . . . . 43 ipconfig / renew . . . . . . . . . . . . . . . . 43 IPSec . . . . . . . . . . . . . . . . . . . . . . . 128 ISP see Internet Service Provider L L2TP . . . . . . . . . . . . . . . . . . . . . . . . 128 LAN . . . . . . . . . . . . . . . . . . . . . . . . 128 LAN connection creating . . . . . . . . . . . . . . . . . . . . . 16 creating a wired . . . . . . .
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / 505_RouterSIX.fm / 16.07.2003 Index Reset . . . . . . . . . . . . . . . . . . . . . . . . 12 reset . . . . . . . . . . . . . . . . . . . . . . . . 108 Reset button . . . . . . . . . . . . . . . . . . . 12 reset button . . . . . . . . . . . . . . . . . . 108 Reset function. . . . . . . . . . . . . . . . . . 12 Restore . . . . . . . . . . . . . . . . . . . . 69, 98 Restoring . . . . . . . . . . . . . . . . . . . . 108 Roaming . . . . . . . . . .
Gigaset SE505 dsl/cable / englisch / A31008-E505-B100-1-7619 / 505_RouterSIX.fm / 16.07.2003 Index Trademarks . . . . . . . . . . . . . . . . . . . . . 4 Transmission Control Protocol see TCP Transmission mode . . . . . . . . . . . . . . 73 full duplex . . . . . . . . . . . . . . . . . . . 16 half duplex . . . . . . . . . . . . . . . . . . 16 Transmission rate . . . . . . . . . . . . . . . 73 Transmission speed . . . . . . . . . . . . . 129 in Ethernet LAN . . . . . . . . . . . . . . . .
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / cover_back.fm / 16.07.2003 Issued by Information and Communication mobile Haidenauplatz 1 D-81667 Munich © Siemens AG 2003 All rights reserved. Subject to availability. Subject to change. 07/2003 Siemens AG http://www.my-siemens.com Order No.
