Specifications

104
Appendix
Gigaset WLAN Repeater/ englisch / A31008-E505-B105-1-7619 / appendix.fm / 08.03.2004
You cannot access
the Gigaset WLAN
Repeater from a PC,
for example to call
the configuration
program (connec-
tion via LAN cable).
The connection
between PC and the
Gigaset WLAN
Repeater is inter-
rupted. The LED for
the LAN connection
does not light up.
ì Check the cable connection
(see above).
The PC's network set-
tings are wrong.
ì Make sure that the PC has the right
configuration for connecting to the
Gigaset WLAN Repeater, for exam-
ple that the IP address and subnet
mask have been set correctly or the
automatic obtaining of the IP
address has been activated
(see page 24).
Your PC is configured
for the automatic
obtaining of IP
addresses, but the
DHCP server of your
Gigaset WLAN
Repeater has been
switched off.
ì Assign a static IP address for your PC
in the Gigaset WLAN Repeater
address block (see page 31).
The IP address of your
Gigaset WLAN
Repeater has
changed as you have
activated the option
Obtained automati-
cally (see page 83).
ì
Check in the log of your DHCP server
from which the Gigaset WLAN
Repeater obtained its IP address to
see which IP address was assigned
to it and enter this address in your
browser. Try resetting your Gigaset
WLAN Repeater to the factory set-
tings so that access is via address
192.168.2.254 again
(see page 102).
Problem Possible cause Remedy