Specifications

Description
3.4 Description of the product
SCALANCE X-400 BA
52 Operating Instructions, 03/2009, C79000-G8976-C186-07
Options for slots 5 and 6 (SCALANCE X408-2)
Slots 5 and 6 of the basic device each have two RJ-45 jacks for connecting TP cables. The
possible data transmission rates on electrical connections are 10, 100, or 1000 Mbps. An
optical gigabit or Fast Ethernet module in slot 5 and/or 6 allows data transmission with
multimode or single mode FOC. In this case, the two RJ-45 jacks below the module can no
longer be used.
)
/
/
50
6%
'
'
[

6&
$/$1
&
(
;

&R
Y
H
U
&R
Y
H
U

3
RZHUPR
G
X
O
H
&
38PRGXOH
[
5-
0ES
V
S
7
ZLVWHG
S
DLU
6ORW6ORW6ORW6ORW6ORW 6ORW
3
3
3
3
1RWXVHG
6ORW
1
RWXVH
G
[5-
b0ESV
7ZLVWHGSDLU
[5-
b0ESV
7ZLVWHGSDLU
[ [
&R
Y
H
U
Figure 3-27 Slots of the media modules
LED display of the FO media modules
The LED displays of a module are the same as the LEDs of the basic device. With optical
transmission, only a fixed transmission rate and full duplex mode are possible. The display in
display modes B and C is analogous.
In display mode A, the current connection status is displayed.
In display mode B, the fixed transmission rate is displayed.
In display mode C, the full duplex mode is always displayed.
In display mode D, you can see whether or not the port is monitored.
3.4.4.2 Fast Ethernet media module MM491-2 (100Base-FX)
Introduction
SCALANCE X414-3E
The Fast Ethernet media module MM491-2 can be used optionally in slots 6 and 7 and
when using the media module extender EM496-4, it can also be used in slots 12 through
15. Mixed operation with the Fast Ethernet media modules MM491-2LD and
MM491-2LH+ is possible.
SCALANCE X408-2
As an option, the Fast Ethernet media module MM491-2 can be used in slots 5 and 6 of