Specifications

Configuration / project engineering
6.6 Replacing the C-PLUG
SCALANCE X-400 BA
Operating Instructions, 03/2009, C79000-G8976-C186-07
121
NOTICE
The C-PLUG must only be removed or inserted when the power supply to the device is
turned off.
Inserting in the C-PLUG slot
The C-PLUG of the SCALANCE X414-3E is located on the front of the CPU module below
the labeling strip. The C-PLUG of the SCALANCE X408-2 on the power module. After
removing the labeling strip, the C-PLUG is inserted in the receptacle with the socket
connector leading. The notch in the casing must be on the right. The C-PLUG is inserted by
pressing it into the receptacle until the C-PLUG is flush with the front surface of the CPU.
Figure 6-14 Removing the C-PLUG from the SCALANCE X414-3E